Hifiverse

Phonostages - Venture Audio VP 100P

Description, images, technical data and specifications

Venture Audio VP 100P
Image source - (c) Venture Audio

The VP 100P is a separate phono stage preamplifier for MM and MC cartridges from Venture Audio Pte. Ltd., a company founded in 1986 that also designs loudspeakers, cables and its own drivers. Venture describes it as a current preamplifier, designed as a current generator that adapts itself to numerous cartridges. It sits in the Venture amplifier range next to the V200A+ and V120S amplifiers and the VP 200DT preamplifier with DAC.

Key specs that matter

Gain is 42 dB for MM and 65 dB for MC. Both sections are specified at a signal-to-noise ratio above 85 dB and THD below 0.05% (1 V, 1 kHz), with a nominal output of 1 V. DC offset is below 0.5 mV. Two single-ended inputs are provided, one per section. The main chassis measures 483 x 90 x 330 mm and weighs 9 kg.

Engineering and use context

Its input is based on a direct link to the phono/RIAA stage, which Venture says ensures linearity. RIAA equalisation is applied in the feedback loop, and this RIAA feedback is quasi constant across the whole audio bandwidth. Venture adds that the distortion ratio descends slightly as frequency rises, and the same THD figure is quoted for the MM and the MC section.

MM and MC operation use fully separated circuitry. The two sections share no connectors, circuitry or components, so each cartridge type has its own input and its own signal path. Both are built as current preamplifier circuits on Teflon printed circuit boards.

A fully independent power supply sits in an external chassis. According to Venture, moving it out of the main enclosure gives better magnetic isolation from the audio circuits.

Pairing

A line-level input on a preamplifier or integrated amplifier is required. Low-output moving-coil cartridges connect to the MC section. The two separate inputs allow one MM and one MC cartridge to stay connected at the same time, and Venture's own line stage is the VP 200DT.

Alternatives

Venture Audio has no other phono stage in its range.

Specifications

  • Model name

    VP 100P

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    2

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    42 (MM), 65 (MC)

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    <0.05

  • Dimensions (mm)

    483 x 90 x 330

  • Weight (kg)

    9.0

  • Official link