Hifiverse

Phonostages - AVID Velsonic

Description, images, technical data and specifications

AVID Velsonic
Image source - (c) AVID

The AVID Velsonic is a two-box reference phono pre-amplifier for MM and MC cartridges, and AVID describes it as its flagship phono stage. It replaces the Pulsare series, which had been in production since 2010. The Velsonic was launched in May 2026 at GBP 11,995, EUR 15,995 and USD 19,995.

Key specs that matter

Gain is selectable in eight 5 dB steps from 35 to 70 dB. Input resistance has twelve settings - 10, 30, 100, 200, 300, 400, 500 and 800 ohms, 1k, 5k, 10k and 47k ohms. Capacitance is 100, 200 or 500 pF for MM and 1.5, 10 or 20 nF for MC. RIAA accuracy is ±0.5 dB (5 Hz - 70 kHz, Neumann HF correction), and distortion is less than 0.001%. Noise is -81 dB MM and -67 dB MC (A-weighted, high setting). Maximum input at 1 kHz is 192 mV MM and 6.8 mV MC, maximum output is 21 V RMS and output impedance is 20 ohms. Channel separation is better than -90 dB (5 Hz - 20 kHz). The subsonic filter is first order, -3 dB at 10 Hz. Phono unit and PSU each measure 463 x 100 x 338 mm (W x H x D), at 12.2 kg and 14.9 kg.

Engineering and use context

AVID keeps the signal path fully analogue, with no digital circuits and only the essential controls. Its architecture is fully balanced and applies balanced principles even with unbalanced sources. Relay-controlled adjustments set gain and loading, and AVID states that they preserve the fragile source signal. Equalisation is a passive RIAA circuit with Neumann HF correction and precision-matched components.

Both XLR and RCA phono inputs can be used at the same time, so two cartridges can be connected and selected from the front panel. Outputs are balanced XLR and unbalanced RCA, and both operate simultaneously. Resistance and capacitance can be changed on the fly. A mono mode and the subsonic filter are switched from the front panel, and a ground lift switch offers Floating and Ground positions.

The external power supply is double-regulated with a 300 VA transformer and delivers dedicated power to each channel through an umbilical cable. Mains enters through an IEC inlet with built-in filters, at 100 - 240 V AC, 50/60 Hz and 10 W max. Warranty extends to five years after online registration.

Pairing

A tonearm cable with a balanced XLR termination is recommended for the balanced input. A line-level input on the preamplifier or integrated amplifier is required.

Alternatives

The AVID Pulsus II is a smaller phono stage in the current AVID range.

Specifications

  • Model name

    Velsonic

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    N/A

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    10R-30R-100R-200R-300R-400R-500R-800R-1K-5k-10K-47K

  • Output impedance (Ω)

    20

  • Gain (dB)

    35-40-45-50-55-60-65-70

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    5

  • Frequency response high +/- 3dB (Hz)

    70 000

  • Total Harmonic Distortion + Noise (%)

    < 0.001

  • Dimensions (mm)

    463 x 338 x 100

  • Weight (kg)

    12.2 + 14.9 (PSU)

  • Official link

Related content