Hifiverse

Phonostages - Gryphon Audio PS3

Description, images, technical data and specifications

Gryphon Audio PS3
Image source - (c) Gryphon Audio

The PS3 is an MM/MC phono stage module from Gryphon Audio Designs of Denmark, purpose-designed for installation inside a Gryphon amplifier rather than as a stand-alone unit. It is an optional module for the Diablo 333 integrated amplifier, and Gryphon says more host models are to come. The circuit is based on the Legato phono stage, and the PS3 is an updated version of the PS2 and PS2-S with an extended range of MC load settings. It is designed and built in Denmark, and the price is CAD 8,800.

Key specs that matter

Gain is 64 dB (MC) and 42 dB (MM). MC load impedance is 20 - 1600 ohms in 15 steps, and MM load is 47 kohms in parallel with 220 pF. Signal-to-noise ratio is better than 72 dB for MC (2.5 mV input, 1 kHz) and better than 84 dB for MM (100 mV input, 1 kHz). Maximum input voltage is 7 mV (MC) and 100 mV (MM), and Gryphon warns that exceeding it can damage the module. Input is through gold-plated Neutrik XLR balanced sockets, left and right. Net weight is 1.15 kg.

Engineering and use context

Gryphon designed the PS3 to exploit the inherently balanced nature of the phono cartridge, with discrete balanced circuitry from input to output. Its topology is true dual mono class A with no global negative feedback, and it is DC-coupled throughout. Left and right channels are separated electrically and mechanically. Matched low-noise, high-speed transistors are used in the differential stages, and polypropylene capacitors in the RIAA correction stages. Low-noise regulated supplies of ±23 V DC power the circuit, which sits on a four-layer printed circuit board with 70 µm copper traces and an ultra-short signal path with minimal internal wiring.

MC load is set with eight switches per channel on the rear panel, according to a table in the manual, and the setting must be the same on both sides. Values are 20, 30, 40, 50, 60, 85, 100, 120, 150, 210, 300, 500, 750, 1000 and 1600 ohms. Selection of MM or MC mode is made in the Diablo 333 menu. A mode change alters the total gain through the module, and the circuit then needs about 25 seconds to settle while a progress bar is shown. In the same menu the phono input can be renamed and given an input level match of 0 - +8 dB, and the PHONO button on the remote selects it directly.

Gryphon specifies installation by authorised technicians only. A DAC3 module can be installed in the Diablo 333 separately or together with the PS3.

Pairing

A tonearm cable terminated in XLR plugs is required, and Gryphon advises against RCA-to-XLR adaptors. The host amplifier is the Diablo 333.

Alternatives

The Gryphon PS2-S is the earlier MM/MC phono stage module for Gryphon amplifiers.

Specifications

  • Model name

    PS3

  • Inputs (balanced)

    1

  • Inputs (single-ended)

    N/A

  • MC current-sensing input impedance (Ω)

    from 20 to 1600 in steps

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    MC: 64dB MM: 42dB

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

    N/A