The PPA V790 is a phono preamplifier from Violectric, the German maker better known for its headphone amplifiers. It is a desktop unit with three balanced and three unbalanced inputs, so up to six cartridges can stay connected at once, each input with its own settings. The PPA V790 is made in Germany, finished in black and priced at EUR 4,999 including VAT. A power cord and a manual are supplied with it.
Key specs that matter
Inputs are 3 x balanced stereo on XLR and 3 x unbalanced stereo on RCA. Gain is adjustable in 7 steps from +30 dB to +66 dB (a factor of 30 to 2000). For MC cartridges there are 7 selectable impedances from 10 to 1000 ohms, and for MM cartridges 8 selectable capacitances from 22 to 1000 pF. EQ curves are RIAA, NAB and Columbia-LP, with a filter accuracy of 0.1 dB. A switchable 20 Hz subsonic filter is provided. Output boost is 0, +6 or +12 dB per input for matching the following equipment. Output impedance is below 1 ohm.
Engineering and use context
Violectric uses DC-coupled gain stages with cascaded bipolar superfast input transistors, and quotes low noise, low distortion and a high dynamic range for the circuit. No input is fixed as MM or MC. For every cartridge the input impedance, input capacitance, EQ curve, subsonic filter and output boost are set individually, and all individual adjustments are stored.
Settings are made with clearly labelled push buttons on the front panel and are shown by white LEDs. A clip indicator on the front panel signals incorrect operation.
Pairing
A line input on a preamplifier or an integrated amplifier is required. A balanced tonearm lead connects to an XLR input, a single-ended one to an RCA input. Both MM and MC cartridges are supported on every input.
Alternatives
The PPA V600 is another phono preamplifier from Violectric.