The PH 150 is a tube phono stage from ModWright Instruments of Amboy, Washington, listed by the company as the PH 150 Reference Phono Stage. ModWright describes it as an all tube, transformer-coupled design with an external solid-state PS 150 power supply. Loading, gain and input selection are all adjustable on the fly from the front panel, with or without music playing.
Key specs that matter
Tube complement is two 6C45 and two 6922 signal tubes, and any 6922, 6DJ8 or 7308 compatible tube may be substituted for the 6922. Maximum gain is 72 dB (MC) and 57 dB (MM), with 0, -6 and -12 dB attenuation steps for both inputs. MC loading is resistive only, at 10, 50, 100, 200, 500 or 1000 ohms. For MM, resistance is fixed at 47 kOhm and capacitance is 0, 100, 220, 330, 470 or 680 pF. Frequency response is 20 Hz - 20 kHz (±0.2 dB). There is one RCA input pair for MM and one for MC, and outputs are one RCA pair and one fully balanced XLR pair. The PH 150 measures 432 x 305 x 127 mm (W x D x H) and weighs 8.6 kg, while the PS 150 measures 267 x 216 x 127 mm and weighs 6.8 kg.
Engineering and use context
Four tubes sit in 9-pin ceramic sockets under the lid of the phono stage. At power-on the unit stays in mute for approximately 25 seconds while the tubes stabilise and reach operating voltage, and a blue LED above the mute switch goes out when it is ready.
Its PS 150 supply is solid-state, has no user-serviceable parts and delivers the DC voltages over a 1.2 m blue umbilical with locking 8-pin male and female connectors. ModWright recommends keeping the supply well separated from the phono stage for the lowest possible noise. A single 5 x 20 mm slow-blow fuse is rated 1.5 A for 120 V operation and 0.75 A for 240 V.
On the front panel, separate knobs select MM, Mute or MC, set the gain attenuation, the MM capacitance and the MC resistance, and a button switches between stereo and mono. Input switching on the fly is intended for turntables with multiple arms. A rear toggle inverts phase and another selects the RCA or XLR outputs. The ground lug is common to signal ground, earth ground and both enclosures. ModWright gives a non-transferable five-year warranty from the date of purchase.
Pairing
A preamplifier or integrated amplifier with a balanced XLR or RCA line input is required. ModWright's LS 300 and LS 99 balanced tube preamplifiers accept the XLR output. The gain steps cover MM and MC cartridges of high, medium or low output.
Alternatives
The PH 9.0 is ModWright's other tube phono stage, offered as the PH 9.0, PH 9.0X and PH 9.0XT.