Hifiverse

Phonostages — CH Precision P10

Description, images, technical data and specifications

CH Precision P10
Image source - (c) CH Precision

The P10 Reference Phono Preamplifier is the phono stage of the CH Precision 10-Series, designed to stand beside the L10 Reference Line Stage and the M10 Reference Power Amplifier. It is a twin-chassis design, with the audio circuitry and a dedicated power supply in separate units, and it succeeds the P1 with a noise floor that CH Precision quotes as 5 dB lower. The standard stereo two-chassis version can later be expanded with a second P10 to a four-chassis true monaural configuration, in which each channel has its own power supply.

Key specs that matter

Four fully independent inputs are provided, two MC current-sensing and two MM/MC voltage-sensing, each on both XLR and RCA connectors. Input impedance is below 100 mΩ (virtual ground) for MC and user selectable from 5 ohms to 100 kohms for MM/MC. Gain at 1 kHz on the single-ended output is +56 to +77 dB for MC (10 ohm cartridge) and +42 to +75 dB for MM/MC, in 3 dB steps, and the balanced output is 6 dB higher. Equivalent input noise (20 Hz - 20 kHz, A-weighted, 1 ohm termination) is below -144 dBu for MC. Playback EQ curve accuracy is ±0.1 dB. THD+N is below 0.001% on the voltage input with gain below 50 dB and below the noise floor at higher gain and on the current input. Outputs per channel are one balanced XLR, one single-ended RCA and one single-ended BNC, at up to 8 Vrms balanced. Each unit measures 440 x 440 x 133 mm, and the weights are 19 kg (phono stage) and 23 kg (power supply).

Engineering and use context

A newly developed three-stage gain topology is used, and feedback is user-selectable as global or local. RIAA is standard, and an optional EQ curves module pair adds EMI, Columbia (LP), Decca (London), DGG (Teldec), NARTB (NAB), Capitol/AES and Philips. Stereo/mono switching, high-pass filtering and a Neumann pole overlay complete the options.

Software analysis proposes loading values from real-time measurements, after which the digital layer withdraws and the signal path stays purely analogue. Inside the power unit are heavy regulation, extensive local decoupling and galvanic isolation between critical stages, with each rail filtered and routed to separate the analogue and digital domains. A newly engineered mechanical grounding system is also used. Control is from the 5-button front panel with an AMOLED display, the IR remote or the CH Control App.

Pairing

A line preamplifier is required, and the matching line stage is the L10. The balanced XLR output connects to balanced preamplifier inputs. Four inputs allow up to four tonearms or cartridges.

Alternatives

The P1.5 is CH Precision's 1-Series phono preamplifier, with two current-sensing inputs and one voltage-sensing input.

Specifications

  • Model name

    P10

  • Inputs (balanced)

    2

  • Inputs (single-ended)

    2

  • MC current-sensing input impedance (Ω)

    100

  • MM/MC voltage input impedance (Ω)

    100 - 5

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    N/A

  • Playback EQ curves accuracy (dB)

    0.1

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    0.001

  • Dimensions (mm)

    N/A

  • Weight (kg)

    23 + 20

  • Official link

Related content

More components