Hifiverse

Phonostages - Backert Labs Optik Phono 1.1

Description, images, technical data and specifications

Backert Labs Optik Phono 1.1
Image source - (c) Backert Labs

The Optik Phono 1.1 is a tube phono equalizer from Backert Labs for DS Audio optical cartridges. It is designed and built by Bob and Gary Backert in Pennsylvania, with a chassis machined in the USA and US-made circuit boards. It does not work as an MM or MC phono stage. Price is USD 11,500, and units are made to order, typically within 10 to 14 business days.

Key specs that matter

Amplification uses two 12AU7 (or equivalent) tubes with Backert Labs' auto bias circuit, in a pure Class A design with no global or local feedback. There are two separate RCA inputs, each for a tonearm with a stereo or mono DS Audio cartridge, selected by an Input 1/Input 2 switch on the front panel. A front-panel gain switch gives two gain levels, and a mute switch is also on the front. Outputs are fully balanced XLR and single-ended RCA. Power comes from three GreenForce power supplies and a custom-designed toroidal power transformer.

Engineering and use context

The tubed amplification circuit comes from the Backert Labs Rhythm line stage preamplifier and uses the company's proprietary gain stage. Backert Labs recommends American-made 12AU7 tubes from the 1960s, and a screwless tube door in the top panel gives direct access to both. When one input is selected, the cartridge circuit of the other is fully deactivated.

Two of the patented GreenForce supplies are in dual-mono configuration for the audio signal and use PTFE capacitors. A third GreenForce supply, with V-Cap ODAM capacitors, powers the light sensor of the cartridge. In key areas of the circuit board the audio signal runs through solid-silver wire.

The circuit board is supported by an unfinished solid brass bottom panel, and the unit stands on IsoAcoustics Gaia feet. No screws, fasteners or ventilation holes are visible on the outside. The chassis is black, and the front face is silver or black at no extra cost. Powder coating in red, blue or other colours costs USD 300 extra.

Pairing

A DS Audio optical cartridge is required. Two tonearms, or a stereo and a mono DS Audio cartridge, can stay connected at the same time. The XLR output connects to a balanced preamplifier input and the RCA output to any line input.

Alternatives

The Rhumba XPhono 1.1 is the Backert Labs tube phono preamplifier for moving-magnet and moving-coil cartridges.

Specifications

  • Model name

    Optik Phono 1.1

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    N/A

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    N/A

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content