The MP100 is a two-channel solid-state phono preamplifier and, according to McIntosh Laboratory, the company's first dedicated phono preamplifier. It has separate moving coil and moving magnet inputs with six load settings each, balanced and unbalanced analogue outputs and three digital outputs for recording records to a computer. McIntosh now lists it as retired with limited availability, with a 3-year limited warranty.
Key specs that matter
MC input impedance is selectable at 25, 50, 100, 200, 400 or 1k ohms with 470 pF. The MM input is 47 kohms, with capacitance of 50, 100, 150, 200, 300 or 400 pF. Voltage gain is 60 dB (MC) and 40 dB (MM), and sensitivity is 1 mV (MC) and 10 mV (MM). Maximum input signal is 8 mV (MC) and 80 mV (MM). Signal-to-noise ratio is 78 dB (MC) and 80 dB (MM). THD is 0.005%, and frequency response is ±0.3 dB from 20 Hz to 20 kHz. Rated output is 2 V balanced and 1 V unbalanced, maximum output 16 V/8 V RMS (balanced/unbalanced), and output impedance 200 ohms balanced and 100 ohms unbalanced. Coaxial, optical and USB outputs all deliver PCM at 24-bit/96 kHz. Power consumption is 8 W. Dimensions are 292 x 96 x 425 mm (W x H x D), and weight is 3.9 kg.
Engineering and use context
A single equalisation curve is provided, RIAA. Each analogue output is a fixed-level stereo pair, one on XLR and one on RCA. For purely analogue use, the digital outputs can be completely disabled and powered down.
With a suitable conversion program on the computer, the USB output records an album to digital files, and a clipping indicator shows when a loud passage requires the digital output level to be lowered. A Mono switch is provided for mono records, and McIntosh states that it decreases noise when playing them.
Its narrow chassis is the format McIntosh also uses for the MXA80 integrated audio system, the MHA150 headphone amplifier and the MB50 streaming audio player. The MP100 has no output meters. On the rear panel are one power control input and one power control output for switching with other McIntosh components. McIntosh describes three uses - the main component of a new vinyl system, an added phono stage for a system with an older preamplifier, and a turntable input for a home theatre system.
Pairing
A line-level input on a preamplifier, integrated amplifier or AV processor is required, balanced or unbalanced. Two turntables can be connected at once, one with an MC and one with an MM cartridge.
Alternatives
The McIntosh MP1100 is a fully balanced vacuum tube phono preamplifier.