Hifiverse

Phonostages - Audio Note M9 RIAA

Description, images, technical data and specifications

Audio Note M9 RIAA
Image source - (c) Audio Note

The M9 RIAA is a tube moving-magnet phono stage from Audio Note (UK), built as a main unit and a separate power supply chassis. Audio Note describes the M9 as a full Level 5 product, the top level of its performance grading. The M9 family includes the M9 Phono and M9 Phono Signature preamplifiers and the M9 RIAA and M9 RIAA Signature phono stages. Fascia options are anodised aluminium and black acrylic.

Key specs that matter

Input impedance is 47 kohms, and input sensitivity is 5 mV for 1 V output. Gain is 46 dB at 1 kHz, output impedance is below 10 ohms and output noise is below 1.8 mV RMS (unweighted). Tube complement is 1 x 6463, 1 x EF80, 1 x E80CC, 2 x 6X5, 2 x 5651 and 2 x ECL82. Maximum power consumption is 81 W from AC 100-120 V or 220-240 V, 50/60 Hz. Each unit measures 140 x 440 x 410 mm (H x W x D), total weight is 30 kg for both, and shipping weight is 40 kg in two cartons.

Engineering and use context

The M9 RIAA uses a single-ended, zero feedback circuit topology with pure class A tube operation and no phase splitter. Audio Note says its circuits aim to minimise non-harmonic and time-based anomalies rather than to reach the lowest harmonic or intermodulation distortion figures. Each stage is powered by an independent supply housed in the separate chassis. Two dedicated umbilical cables, one for the line stage and one for the phono stage, connect the two boxes through military-specification circular connectors with a push-and-twist bayonet.

Its output transformers are custom designed by Audio Note, fully silver wound and built on the company's own 55% nickel-iron C-cores. Outputs are two identical pairs of RCA sockets, usable for bi-amping, and a pair of male XLR sockets. A toggle switch selects balanced or single-ended output, and both cannot be used at once. In the Balanced position the centre tap of the output transformer secondary is connected to ground, while in the Single Ended position the secondary floats. Both chassis carry a ground post, the main unit for the turntable earth and the supply for amplifiers that need one. A rocker switch on the supply's rear panel turns the stage on, and it needs about 45 seconds to initialise. Supplied tubes are rated for about three years of operation.

Pairing

A moving-magnet cartridge is required, or a moving-coil cartridge with an Audio Note step-up transformer. The XLR outputs connect to balanced amplifier inputs. With an RCA amplifier input on an XLR cable, the switch is set to Single Ended.

Alternatives

The M8 RIAA is an Audio Note tube phono stage, also built to Level 5 criteria.

Specifications

  • Model name

    M9 RIAA

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    1

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    47 000

  • Output impedance (Ω)

    <10

  • Gain (dB)

    N/A

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Dimensions (mm)

    140 x 440 x 410 (Pre) + 140 x 440 x 410 (PSU)

  • Weight (kg)

    30 (between two units)

  • Official link