Hifiverse

Phonostages - Treehaus Audiolab LCR Phono

Description, images, technical data and specifications

Treehaus Audiolab LCR Phono
Image source - (c) Treehaus Audiolab

The LCR Phono is a two-chassis tube phono preamplifier from Treehaus Audiolab, a Connecticut maker founded in 2017 that also builds field coil loudspeakers, 300B amplifiers and a TVC preamplifier. It was introduced at AXPONA 2025 at USD 24,000 including tubes. Its name refers to the inductor (L), capacitor (C) and resistor (R) network that applies the RIAA equalisation.

Key specs that matter

Gain is 46 dB. There are three inputs and one output, all on Cardas RCA connectors. Input 1 has selectable loading of 620 ohms, 15k, 30k, 47k, 68k and 100k, input 2 has 620 ohms, 2k, 3.5k, 6.8k, 10k and 47k, and input capacitance is 120 pF. Output impedance is 3 kohms. Frequency response is 20 Hz - 20 kHz (±1 dB), THD is 0.09% at 0.55 V RMS output (2.5 mV RMS input) and signal-to-noise ratio is 90 dB or better. Amplification uses a 7308 in the first stage and a 12AT7 in the second stage, with a 6CL3 for rectification.

Engineering and use context

Treehaus places the passive LCR equalisation network between the active gain stages. Only the inductors are in line with the signal path, while the capacitors and resistors are connected in parallel. Each inductor has a Finemet core and is hand-coated with Urushi lacquer.

For the input position Treehaus chose the 7308 twin triode for its low noise and resistance to microphonics, and the 12AT7 adds further gain in the second stage.

Power comes from a separate tube-rectified supply in its own enclosure, connected by an umbilical cord with MIL-spec Amphenol connectors. It has a toroidal power transformer, a CLCLC filter with a Finemet choke in the final stage, DC heated filaments and a high voltage shunt regulator for each channel. A switch on the front selects mute, stereo or mono.

Two industrial designs are offered. Kinsuido draws on 1970s Japanese hi-fi and mid-century modern style, with hardwood veneer cases over Baltic birch, a 5 mm oxidised aluminium faceplate and patinated brass knobs. A/Machines refers to early Western Electric and Klangfilm equipment, with large dials, Simpson gauges, black inset panels and hammertone cases. Custom finishes are available on request.

Pairing

MM cartridges connect directly. An MC cartridge requires a step-up transformer, and the matching unit from the brand is the Treehaus Audiolab MC SUT. A line input with a high input impedance is required for the 3 kohm output.

Alternatives

Treehaus Audiolab makes no other phono preamplifier.

Specifications

  • Model name

    LCR Phono

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    3

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    3000

  • Gain (dB)

    46

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20000

  • Total Harmonic Distortion + Noise (%)

    0.09

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content