Hifiverse

Phonostages - Kondo Audio Note Japan GE-10i

Description, images, technical data and specifications

Kondo Audio Note Japan GE-10i
Image source - (c) Kondo Audio Note Japan

The GE-10i is a stereo tube phono equalizer amplifier from Kondo Audio Note Japan and the company's flagship phono amplifier. Audio Note designed it to work with the G-1000 flagship preamplifier, and together they form a preamplifier system for analogue playback. It is built in two boxes, a main unit and a separate power supply unit. European prices have been around EUR 85,000, and the UK list price is GBP 67,427.

Key specs that matter

Two pairs of unbalanced RCA inputs present 47 kohm, and one RCA output pair is specified for a minimum load of 20 kohm. Gain is 38 dB. RIAA deviation is ±0.5 dB (30 Hz - 20 kHz, excluding the low-cut filter), and noise is less than 1.5 mV. Its tube complement is two E88CC, four 6072 and two EZ81 (6CA4) rectifier tubes. Power consumption is 46 W. Main unit and power supply unit share the same case size of 320 x 160 x 414 mm (W x H x D, excluding protrusions), with weights of 15 kg and 20 kg.

Engineering and use context

Equalization is of the CR type. A cascode circuit forms the first stage, and the equalizer network is followed by a cathode follower for a low output impedance. Audio Note built the phono section as a module to combine short signal paths with hand wiring. Six tubes and large silver signal capacitors are mounted inside this module, and four decoupling capacitors are placed around it.

In the separate chassis sits a fully independent power supply, with independent circuits for the left and right channels. Rectification is by tube, and the power transformer and chokes are arranged for minimum vibration. Ripple filter capacitors and decoupling capacitors are clearly separated, and three kinds of decoupling capacitor are used. A shunt type DC 6.3 V heater supply holds the heater voltage within ±5%.

The output loading impedance has three selectable values. Once the GE-10i is connected to a preamplifier and the matching value is selected, the resultant load is 20 kohm, and this load together with the output capacitor forms a low-cut filter against subsonics. Parts include Audio Note silver foil and electrolytic capacitors, silver lead resistors, SSW silk silver wiring, original RCA jacks, original power transformers and chokes, and a copper main chassis. The power cable listed for it is the ACz-AVOCADO.

Pairing

A moving coil cartridge requires a step-up transformer. Moving magnet cartridges connect directly. The matching preamplifier is the G-1000, and a solid-state preamplifier with a 20 kohm input impedance is also within the specified load.

Alternatives

The Kondo GE-1 is a single-box tube phono equalizer amplifier with 34 dB of gain.

Specifications

  • Model name

    GE-10i

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    2

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    47 000

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    38

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Dimensions (mm)

    320 x 160 x 414 (main) + 320 x 160 x 414 (PSU)

  • Weight (kg)

    15 (main) + 20 (PSU)

  • Official link