Hifiverse

Phonostages — Vinnie Rossi Canta Phono Preamplifier

Description, images, technical data and specifications

Vinnie Rossi Canta Phono Preamplifier
Image source - (c) Vinnie Rossi

The CANTA Phono Preamplifier is a solid-state MM and MC phono stage from VinnieRossi of Worcester, Massachusetts, and the first model of the CANTA Series. VinnieRossi presents CANTA as a new series that brings its components to a wider range of listeners, alongside the higher Brama Series of integrated amplifier, preamplifier and monoblock power amplifiers. It was first shown at the Hong Kong and Taipei audio shows in August 2026, with first deliveries planned for the end of September at a provisional US price of USD 17,995.

Key specs that matter

Supported cartridges are moving magnet (MM) and moving coil (MC). Inputs and outputs are L/R balanced (XLR) and L/R single-ended (RCA). Gain is 36, 40, 46 and 52 dB for MM and 56, 60, 66 and 72 dB for MC. MM loading is 47k ohms with adjustable capacitance of 100, 200, 300 and 400 pF. For MC there are twenty load values - 10, 15, 18, 20, 25, 30, 40, 50, 60, 70, 80, 90, 100, 150, 180, 200, 250, 400, 600 and 1000 ohms. RIAA accuracy is ±0.1 dB (20 Hz - 20 kHz). Maximum output level is 10 V RMS, and output impedance is below 100 ohms. AC input range is 100-240 V AC (±10%), 50-60 Hz, 1 A. Dimensions are 413 x 324 x 70 mm (W x D x H), and weight is 10 kg.

Engineering and use context

At the input is a fully discrete, balanced JFET stage, the custom Belleson JFET YZ, which works as a transconductance and transimpedance stage. The circuit is dual mono, with independent left and right channel circuitry. Power comes from a supply based on the patented Belleson super-regulator technology. The subsonic filter is a switchable third-order high-pass filter at 20 Hz, and VinnieRossi states that it reduces low-frequency energy from warped records, bearing rumble and structural vibration.

Its chassis is CNC-machined from a solid block of aluminium. According to VinnieRossi, it provides mechanical rigidity, resonance control, electromagnetic shielding and grounding integrity. Gain, loading and other parameters are set through a high-resolution display and precision Swiss rotary encoders on the front panel. All settings are stored in memory and are kept even when the AC mains is disconnected. A USB-C jack is used for firmware updates. Each unit is made in the USA, carries a 10-year warranty and ships in an airtight, waterproof hard case with a custom foam interior.

Pairing

A balanced or single-ended line input on the preamplifier or integrated amplifier is required. The matching CANTA Series components are the CANTA Preamplifier, CANTA Integrated Amplifier and CANTA Stereo Power Amplifier.

Alternatives

VinnieRossi has no other standalone phono stage in its current CANTA and Brama ranges.

Specifications

  • Model name

    Canta Phono Preamplifier

  • Inputs (balanced)

    1

  • Inputs (single-ended)

    1

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    MC: 10-1000; MM: 47 000

  • Output impedance (Ω)

    <100

  • Gain (dB)

    Moving Magnet: 36, 40, 46, and 52dB, Moving Coil: 56, 60, 66, and 72dB

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Dimensions (mm)

    413 x 324 x 70

  • Weight (kg)

    10

  • Official link

Related content