Hifiverse

Phonostages — CS Port Audio C3EQM2

Description, images, technical data and specifications

CS Port Audio C3EQM2
Image source - (c) CS Port Audio

The CS Port C3EQM2 is a tube phono equalizer amplifier from the Japanese company CS Port Co., Ltd., which also makes turntables, power amplifiers, a preamplifier and active crossovers. It is a CR-type design with two amplification stages based on the C3g tube, and it runs from a large Ni-MH battery so that the audio circuit is completely isolated from the AC line while records are playing. Moving-coil cartridges are handled by an internal step-up transformer.

Key specs that matter

Gain is 63 dB through the MC input and 40 dB through the MM input. The MC input is meant for cartridges of 3 to 20 ohm, and the MM side accepts cartridges of 47 kohm or less. Maximum output reaches 5 V at 1 kHz, distortion is 0.1 % at 1 kHz with 0.76 Vrms out, and output impedance is 90 ohm. There are three inputs in total - MC on one balanced and one unbalanced connection, plus two unbalanced MM inputs - and one balanced and one unbalanced output. The charger accepts AC mains of 100, 120, 200 or 240 V and draws 70 W. The anodised aluminium chassis is 430 mm wide, 90 mm high and 400 mm deep without legs, knobs or terminals, and weighs 13 kg.

Engineering and use context

The C3g was developed by Deutsche Telekom for telephone equipment, and CS Port credits its thin grid wires and wide electrode spacing with highly linear amplification. The tubes are soldered straight to the circuit board without sockets, removing the contact point as a noise source. One battery charge gives 5 hours of playback, or 9 hours with the optional larger pack, and recharging takes 4 hours, or 8 hours with that option. The internal MC transformer uses a high-permeability super Permalloy core, and the outputs are also separated by transformers, which makes the unit less sensitive to noise. Equalization follows the RIAA curve only, so the C3EQM2 does not suit records cut to other curves. CS Port supplies AC cords with the unit and covers it with a 5-year warranty.

Pairing

A low-impedance MC cartridge can be wired straight to the MC input without any extra step-up device, and a turntable with a balanced tonearm lead can use the XLR socket. The two MM inputs serve a second arm or turntable with a moving-magnet cartridge, and either of them can also take an MC cartridge through an external step-up transformer. On the output side, the XLR socket suits a line stage that takes balanced signals, while the unbalanced RCA output works with the ordinary line inputs found on most amplifiers.

Alternatives

CS Port makes no other phono equalizer, so the C3EQM2 is the only phono stage in its current range.

Specifications

  • Model name

    C3EQM2

  • Inputs (balanced)

    1

  • Inputs (single-ended)

    3

  • MC current-sensing input impedance (Ω)

    3 - 20

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    90

  • Gain (dB)

    MC 63, MM 40

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    0.1

  • Dimensions (mm)

    430 × 90 × 400

  • Weight (kg)

    13

  • Official link