Hifiverse

Phonostages — Michell Engineering Apollo

Description, images, technical data and specifications

Michell Engineering Apollo
Image source - (c) Michell Engineering

The Apollo is a two-box MM/MC phono stage from J. A. Michell Engineering of England, sold together with its dedicated Muse external power supply. Michell's phono stages go back more than 30 years to the original Michell Iso, designed for the brand by Tom Evans and Graham Fowler of Trichord. The Apollo marks Michell's return to standalone electronics after a long period in which its electronics work centred on turntable speed control.

Key specs that matter

Gain has five settings of 40, 50, 60, 68 and 73 dB. Five resistive loading options include 47 kohms, 1 kohm, 430 ohms and 100 ohms, and capacitance is fixed at 100 pF. Michell's starting points run from 40 dB for a standard MM cartridge of about 5 mV to 73 dB for a very low-output MC of 0.05 - 0.25 mV. Connections are one stereo RCA input, one stereo RCA line-level output, a turntable grounding terminal and the DC input from the Muse. At 40 dB gain (5 mV, 1 kHz) SINAD is 104/105 dB (L/R), THD is 0.0186%/0.0187% and RIAA deviation is ±0.4 dB. The Apollo measures 115 x 280 x 60 mm, and both units weigh 3 kg together.

Engineering and use context

Its Class A preamplifiers borrow technology typically used in professional microphone amplifiers. A passive RIAA circuit follows, and the subsequent amplification stages also operate in Class A. Michell measures and matches each capacitor by hand for precise channel balance, and each stage is monitored and controlled by feedback circuits. Gain and loading are set with DIP-switch banks on the underside of the Apollo, separately for each channel.

Inside the Muse are a low-noise toroidal transformer, capacitance multiplier technology and voltage regulators, which deliver two filtered and regulated DC outputs. Housing the transformer in a separate case isolates its noise from the amplification circuits. The Apollo's own power supply circuitry then refines and regulates this DC further.

Both units are machined from two solid billets of aluminium with a solid aluminium back plate. Together these parts form a Faraday cage against RF interference. Michell states that the mass and rigidity of the enclosures isolate the circuits from vibration. Made in the UK, the DC link cable has silver-plated OFC copper conductors, FEP insulation, a cotton fibre wrap, aluminium-foil Mylar separators, high-density tinned copper shielding and ChorAlloy-plated XLR connectors.

Pairing

A line-level input on an integrated amplifier or preamplifier is required. MM and MC cartridges both connect directly, with no external step-up transformer. The Apollo output must not go into another phono input.

Alternatives

The Apollo is the only phono stage in the current Michell range.

Specifications

  • Model name

    Apollo

  • Inputs (balanced)

    N/A

  • Inputs (single-ended)

    N/A

  • MC current-sensing input impedance (Ω)

    N/A

  • MM/MC voltage input impedance (Ω)

    N/A

  • Output impedance (Ω)

    N/A

  • Gain (dB)

    N/A

  • Playback EQ curves accuracy (dB)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Total Harmonic Distortion + Noise (%)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content