Hifiverse

Cartridges - MoFi Electronics STUDIOTRACKER MM PHONO

Description, images, technical data and specifications

MoFi Electronics STUDIOTRACKER MM PHONO
Image source - (c) MoFi Electronics

The StudioTracker is a moving-magnet cartridge from MoFi Electronics, the American maker of turntables, phono stages and cartridges. It is the entry model in the brand's cartridge range and is sold for USD 179. MoFi designed it by looking back at where a record starts, on a lacquer cutting lathe.

Key specs that matter

Type is dual magnet (MM) stereo, with a bonded elliptical diamond stylus on an aluminium cantilever. Output voltage is 3.5 mV, and frequency response is 20 Hz - 20 kHz. Compliance is 35 x 10-6 cm/dyne static and 8 x 10-6 cm/dyne dynamic. Tracking force is 1.8 - 2.2 g, with 2 g recommended. Recommended load is 47 kohm and 100 pF. Channel balance is 1.5 dB at 1 kHz. The grey polymer body weighs 6.4 g.

Engineering and use context

The generator is the MoFi V-Twin dual-magnet design. Its two low-mass magnets are aligned in a V formation parallel with the stereo record grooves, mirroring the layout of the cutting head that originally made the grooves.

In the box are the cartridge with a stylus guard, a stylus cleaning brush, a hex driver, two 2.5 x 20 mm and two 2.5 x 18 mm hex screws, two 2.5 mm nuts and two nylon washers. The four headshell leads connect to colour-coded pins.

Pairing

A phono stage with a standard MM input is required. A tonearm with a headshell for two-screw mounting is required.

Alternatives

The UltraTracker is the next MoFi Electronics cartridge up the range, with a nude elliptical stylus and a 9.7 g body.

Specifications

  • Model name

    STUDIOTRACKER MM PHONO

  • Type

    MM

  • Stylus

    Elliptical

  • Body

    Polymer

  • Cantilever

    N/A

  • Coils

    N/A

  • Output voltage (mV@5cm/sec)

    3.5

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Internal impedance (Ohm)

    N/A

  • Channel separation (dB / 1,000 Hz)

    N/A

  • Compliance (×10-6cm/dyne at 100Hz)

    8

  • Recommended load (Ohm)

    N/A

  • Recommended tonearms

    N/A

  • Weight (g)

    6.4

  • Official link