Hifiverse

Cartridges - Genuin Audio sting

Description, images, technical data and specifications

Genuin Audio sting
Image source - (c) Genuin Audio

The sting is a moving-coil cartridge from genuin audio of Germany, whose products are developed by outside designers for the brand and made under manufactory conditions in Germany. It is the only cartridge in a range that also includes the drive turntable, the point tonearm, the pearl phono preamplifier, the tars music server, active loudspeakers and the direct cables. genuin audio names the pearl and the point as its partners within the range.

Key specs that matter

Output voltage is 0.45 mV (1 kHz, 5.6 cm/s horizontal). Channel balance is below 1 dB, and channel separation is above 25 dB. Generator impedance is 14 ohms ±20% at 1 kHz, with coils of 99.9999% pure copper. Compliance is 5 x 10-6 cm/dyne, and tracking force is 2.5 g ±0.3 g. Frequency response is 20 Hz - 45 kHz. Suggested load impedance is above 100 ohms, with 500 - 1,000 ohms recommended. Weight is 11.1 g. With a tonearm of approx. 12 - 20 g moving dynamic mass, tracking ability at 2.5 g is above 80 µm on the Ortofon test record. A Microridge diamond stylus sits on a boron tube cantilever.

Engineering and use context

This is a caseless design. Instead of a body, the moving-coil generator is mounted on a plate of a graphite-fibre compound, a material genuin audio chose for its high rigidity and its absorption of resonances. Multiple longitudinal and transverse grooves are milled into the plate to prevent transmission paths. At the connection pins, a cover protects the thin coil wires, and integrated 2.5 mm threads allow screw mounting to the headshell.

Its basic magnetic circuit is supplemented by a large iron-neodymium magnet for field linearisation. genuin audio states that this additional magnet raises the output voltage and reduces intermodulation distortion. It also attracts metallic micro-particles, so they do not settle in the air gap in front of or behind the coil.

Boron is much stiffer than aluminium, and the boron tube cantilever lowers the moving mass and shifts the resonance frequency upwards. The Microridge stylus has a cut based on the shape of the original cutting stylus.

Pairing

A phono stage with an MC input and adjustable loading in the 500 - 1,000 ohm range is required. Within the range, the matching phono preamplifier is the pearl and the matching tonearm is the point. Other tonearms within the specified moving mass range are compatible.

Alternatives

genuin audio makes no other cartridge besides the sting.

Specifications

  • Model name

    sting

  • Type

    MC

  • Stylus

    Microridge

  • Body

    N/A

  • Cantilever

    Boron Tube

  • Coils

    N/A

  • Output voltage (mV@5cm/sec)

    0.45

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    45 000

  • Internal impedance (Ohm)

    14

  • Channel separation (dB / 1,000 Hz)

    >25

  • Compliance (×10-6cm/dyne at 100Hz)

    5

  • Recommended load (Ohm)

    >100

  • Recommended tonearms

    N/A

  • Weight (g)

    11.1

  • Official link