Hifiverse

Cartridges - Reed Reed SF

Description, images, technical data and specifications

Reed Reed SF
Image source - (c) Reed

The Reed SF is an optical phono cartridge from Reed, the Lithuanian company founded in 2007 in the Kaunas region by Vidmantas Triukas and known mainly for its tonearms. Reed developed it in collaboration with DS Audio of Japan and presented it at High End Munich 2025 together with the Reed EQ phono equaliser and the Reed PS power supply. In Australia the cartridge was priced at AUD 19,000.

Key specs that matter

Signal output is by photo-electric conversion. The cantilever is sapphire and carries a Micro Ridge stylus, and the body is HD phenolic resin with aviation aluminium. Tracking force is 2.0 - 2.2 g, with 2.1 g recommended. Compliance is 12 µm/mN, weight is 9.8 g and the output signal level is 70 mV. Reed specifies channel separation of 27 dB or more at 1 kHz.

Engineering and use context

In place of a magnet or coil moving in a magnetic field, the generator uses an infrared LED, a light shielding plate and two photo cells. Coupled to the cantilever, the plate vibrates in front of the LED, and the photo cells behind it detect the change in brightness. This plate is only 100 microns thick. According to Reed, the moving system is free from magnetic resistance and has a very low moving mass. Each channel has its own LED and photo detector, and the angular movement of the plate lets each detector pick up only its corresponding channel. Output from the photo cells is an analogue voltage.

Reed set three requirements for the body - acoustically passive, homogeneous and highly damped across the operating range. Identical samples of aluminium, Panzerholz and 100% HD phenolic resin were struck with shock waves of equal amplitude, and the decay was measured at a fixed distance. Aluminium took about 120 ms, Panzerholz about 70 ms and HD phenolic resin about 15 ms. Reed chose the resin, which also has low surface roughness, high density and elasticity. Its housing is designed to minimise dust intrusion.

Pairing

An optical cartridge equaliser is required. The matching unit is the Reed EQ, which delivers 600 mV at 1 kHz with the Reed SF and has RCA and XLR outputs plus a 30 or 50 Hz high-pass filter. Power for the cartridge LEDs comes from batteries in the separate Reed PS.

Alternatives

Reed has no other cartridge in its range, and the Reed SF is its only optical model.

Specifications

  • Model name

    Reed SF

  • Type

    N/A

  • Stylus

    N/A

  • Body

    N/A

  • Cantilever

    saphire

  • Coils

    N/A

  • Output voltage (mV@5cm/sec)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Internal impedance (Ohm)

    N/A

  • Channel separation (dB / 1,000 Hz)

    N/A

  • Compliance (×10-6cm/dyne at 100Hz)

    N/A

  • Recommended load (Ohm)

    N/A

  • Recommended tonearms

    N/A

  • Weight (g)

    N/A

  • Official link

    N/A