Hifiverse

Cartridges - Clearaudio N1

Description, images, technical data and specifications

Clearaudio N1
Image source - (c) Clearaudio

The N1 is a moving-magnet phono cartridge from Clearaudio of Erlangen, Germany, the analogue specialist founded in 1978. It is the company's entry into MM cartridges and its cartridge range also includes moving-coil models up to the Diamond Jubilee. Clearaudio announced the N1 on 15 May 2025 and put it on sale in July 2025 at EUR 99, with a replacement stylus at EUR 39.

Key specs that matter

Output voltage is approximately 2.9 mV (1 kHz, 5 cm/s), and frequency response is 20 Hz - 20 kHz. Channel separation is 20 dB and channel balance is ≤2 dB, both at 1 kHz. Tracking ability is 80 µm. Recommended tracking force is 2.2 g (±0.3 g). Coil impedance is 0.66 kOhm (1 kHz) and coil inductance is 400 mH. Clearaudio specifies a load resistance of 47 kOhm and a load capacitance of 100 pF. An elliptical stylus sits on an aluminium cantilever, and compliance is 15 µm/mN. Total mass is 12.5 g (±0.2 g). The manufacturer's warranty is 2 years.

Engineering and use context

A newly developed anodised aluminium housing is the main structural part of the N1. Clearaudio describes it as a stable construction frame and states that, with this overall weight, the cartridge is suitable for light as well as heavier tonearms.

Its stylus carrier uses a plug-in system and can be exchanged even while the cartridge stays installed in the headshell.

Two body colours are offered, black and silver. Both are matched to the design of Clearaudio's compass series of tonearms and turntables. In the Clearaudio range the N1 sits below the MM Concept V2 and the MM Jubilee, and above it the line continues with the company's moving-coil cartridges.

Pairing

A phono stage with an MM input is required. The matching turntable is the Clearaudio compass, available in the same black and silver finishes.

Alternatives

The MM Concept V2 is the next moving-magnet cartridge in Clearaudio's range above the N1.

Specifications

  • Model name

    N1

  • Type

    MM

  • Stylus

    N/A

  • Body

    Aluminium

  • Cantilever

    N/A

  • Coils

    N/A

  • Output voltage (mV@5cm/sec)

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Internal impedance (Ohm)

    N/A

  • Channel separation (dB / 1,000 Hz)

    N/A

  • Compliance (×10-6cm/dyne at 100Hz)

    N/A

  • Recommended load (Ohm)

    N/A

  • Recommended tonearms

    N/A

  • Weight (g)

    N/A

  • Official link