Hifiverse

Cartridges - Ortofon MC X10

Description, images, technical data and specifications

Ortofon MC X10
Image source - (c) Ortofon

The MC X10 is the entry model of the MC X Series, a range of moving coil cartridges from Ortofon of Nakskov, Denmark. Ortofon introduced the series at the Munich High End show as the successor to the MC Quintet line, first with the X10, X20, X30 and X40 and later with the MC X50 at the top. Ortofon lists the X10 at EUR 299, and the UK price was GBP 269. It shares the frame and silver coil wire of the other MC X models, with an elliptical diamond on an aluminium cantilever.

Key specs that matter

Stylus type is elliptical diamond with a tip radius of r/R 8/18 µm, on an aluminium cantilever with Ortofon's exclusive stylus suspension. Output voltage is 0.4 mV at 1 kHz, 5 cm/sec. Internal impedance is 6 ohms DC resistance, and the recommended load resistance is above 50 ohms. Channel separation is better than 24 dB at 1 kHz and channel balance is 0.5 dB at 1 kHz. Frequency response is 20 Hz - 20 kHz (±2 dB). Dynamic lateral compliance is 13 µm/mN, with a recommended tracking force of 2.0 g. Cartridge weight is 8.6 g, the body colour is black, and the cartridge uses a half-inch mount.

Engineering and use context

At the core of the X10 is a honeycomb-structured stainless steel frame made by Metal Injection Moulding (MIM). After moulding and sintering, the frame receives a Physical Vapour Deposition (PVD) surface treatment for appearance and long-term material integrity. Ortofon states that the honeycomb construction ensures mechanical stability.

All MC X cartridges have coils wound with high-purity silver wire. Its newly developed magnet system has a one-piece pole cylinder integrated into a rear magnet yoke and is engineered for magnetic efficiency. Damping comes from rubber compounds developed and produced in-house. These rubber dampers control the physical movement of the coils and minimise unwanted vibration.

Within the series the stylus changes from model to model. The X20 keeps the same frame material, silver coil wire and aluminium cantilever but moves to a nude elliptical diamond.

Pairing

A phono stage with an MC input or a step-up transformer is required. The phono input load must exceed the recommended minimum. A tonearm with a standard half-inch headshell is required.

Alternatives

The Ortofon MC X20 has the same 0.4 mV output and aluminium cantilever with a nude elliptical diamond, ±1 dB frequency response and 15 µm/mN compliance.

Specifications

  • Model name

    MC X10

  • Type

    MC

  • Stylus

    Diamond

  • Body

    N/A

  • Cantilever

    Aluminium

  • Coils

    Silver

  • Output voltage (mV@5cm/sec)

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Internal impedance (Ohm)

    N/A

  • Channel separation (dB / 1,000 Hz)

    24

  • Compliance (×10-6cm/dyne at 100Hz)

    N/A

  • Recommended load (Ohm)

    50

  • Recommended tonearms

    N/A

  • Weight (g)

    8.6

  • Official link

Related content