Hifiverse

Cartridges - Clearaudio Maestro V2

Description, images, technical data and specifications

Clearaudio Maestro V2
Image source - (c) Clearaudio

The Maestro V2 is a moving magnet cartridge from Clearaudio of Erlangen, Germany, and part of the company's MM-V2 series. It combines a hand-polished ebony body with a boron cantilever and a Shibata diamond, a stylus and cantilever pairing that sets it apart from the aluminium-cantilever models of the same series. The US price is USD 1,500.

Key specs that matter

Output voltage is about 3.6 mV (1 kHz, 5 cm/s) and frequency response is 20 Hz - 20 kHz. Channel separation is 25 dB and channel balance 0.3 dB, both at 1 kHz. Tracking ability is 80 µm and the recommended tracking force is 2.2 g (±0.3 g). Coil impedance is 0.66 kOhm (1 kHz) with a coil inductance of 400 mH. Load resistance is 47 kOhm and capacitive load 100 pF. Stylus compliance is 16 µ/mN. Mass of the complete system is 8.4 g (±0.4 g). Clearaudio gives a two-year warranty when the completed warranty card is returned within 14 days of purchase.

Engineering and use context

Clearaudio's MM Technology V2 uses ebony as a low-resonance housing base. To this it adds the lowest practical moving mass, optimised HD grinding of the stylus and effective damping of the whole cartridge. Every model of the series has a hand-polished ebony body, with the single exception of the concept V2, which is made of aluminium.

Each Maestro V2 is measured, analysed and hand-selected several times across four levels. According to Clearaudio, this selection gives homogeneous stereo channels with minimal phase and transient distortion.

Within the ebony MM-V2 models the electrical data are shared. The Artist V2 and Performer V2 have the same 0.66 kOhm coils, 400 mH inductance and 47 kOhm / 100 pF load, but they use an aluminium cantilever with an elliptical diamond and a compliance of 15 µ/mN. Installation is covered by Clearaudio's common instruction manual for the Moving Magnet V2 cartridges.

Pairing

A standard MM phono input is required. Total capacitance of the tonearm cable and phono input should stay close to the specified load. Clearaudio states that the MM-V2 models work on all common tonearms.

Alternatives

The Clearaudio Artist V2 is a moving magnet model with the same ebony body and 3.6 mV output, an aluminium cantilever and an elliptical diamond.

Specifications

  • Model name

    Maestro V2

  • Type

    MM

  • Stylus

    Shibata

  • Body

    Ebony wood

  • Cantilever

    Boron

  • Coils

    N/A

  • Output voltage (mV@5cm/sec)

    3.6

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Internal impedance (Ohm)

    N/A

  • Channel separation (dB / 1,000 Hz)

    25

  • Compliance (×10-6cm/dyne at 100Hz)

    16 μ/mN

  • Recommended load (Ohm)

    47 000

  • Recommended tonearms

    N/A

  • Weight (g)

    8.4

  • Official link