The IQ I is the entry model of the IQ moving magnet cartridge range from Audio Note (UK). Three models make up the range - IQ I, IQ II and IQ III - and they share one body and differ in stylus and cantilever. Black is the only finish listed. Audio Note covers the cartridge with a one-year warranty.
Key specs that matter
Frequency response is 20 Hz - 20 kHz (±2 dB). Sensitivity is 6.5 mV ±1.5 dB (1 kHz, 5 cm/s). Internal resistance is 660 ohms and internal inductance is 570 mH. Load resistance is 47 kOhm and load capacitance is 150 - 200 pF. Channel separation is 25 dB and channel balance 2 dB, both at 1 kHz. Static compliance is 24 mm/N lateral and 16 mm/N vertical, and equivalent tip mass is 0.45 mg. Vertical tracking angle is 24 degrees. Tracking force is 1.5 - 2.5 g (1.75 g nominal). Cartridge weight is 6.3 g, with 12.7 mm fixing centres.
Engineering and use context
Its body is made from Pocon, a rigid yet lightweight material, and is equipped with integral threaded inserts for mounting in the tonearm headshell. According to Audio Note, this mounting system improves mechanical coupling between cartridge body and headshell compared with traditional nut and bolt fixing. Inside, the coils are wound from very fine copper wire. A specific grade of hardened aluminium tube forms the cantilever, and the suspension is stiffer than is usual in moving magnet cartridges of this type.
On the IQ I the stylus is a Gyger Type II. The complete stylus assembly is removable, and all IQ stylus assemblies are interchangeable, and an IQ I body accepts the IQ III stylus assembly. Each cartridge ships in a clear acrylic box with the stylus and stylus guard installed, two hex head mounting bolts and a matching wrench. Connection pins follow the international colour code - white and blue for the left channel, red and green for the right - and must not be soldered. Audio Note estimates stylus life at about 1000 to 3000 hours.
Pairing
A phono stage with a moving magnet input of 47 kOhm is required. Total capacitance in parallel, arm lead and amplifier input together, must not exceed 200 pF. No step-up transformer is required.
Alternatives
The Audio Note IQ II keeps the same body and hardened aluminium cantilever and uses an Audio Note Type 2 stylus.