The DL-301II is a low-output moving-coil phono cartridge from Denon, the Japanese company founded in 1910, and Denon lists it as a reference MC model. It was released in February 1984 at 22,000 yen as a development of the DL-301, and it remained in production for decades - the Japanese price was 25,000 yen around 1996 and 38,000 yen by 2016. Denon now shows it among archived products on its US website.
Key specs that matter
Generating system is moving coil. Output voltage is 0.4 mV (1 kHz, 50 mm/s, horizontal). Impedance is 33 ohms, and recommended load impedance is more than 100 ohms, or 40 ohms when a step-up transformer is used. Playback frequency range is 20 Hz - 60 kHz. Channel separation is over 28 dB and channel balance is within 1 dB, both at 1 kHz. Dynamic compliance is 13 x 10-6 cm/dyne (100 Hz test record), and static compliance is 35 x 10-6 cm/dyne. Its stylus tip is a special elliptical solid diamond with a 0.07 x 0.14 mm rectangular cross section. Tracking force is 1.4 g ± 0.2 g. Net weight is 6 g.
Engineering and use context
Denon modelled the DL-301II on the DL-301 and upgraded it from the body to the vibrating system. That vibrating system combines a double-layer tapered cantilever, a cruciform armature and a minute solid diamond stylus, and according to Denon this rigid, lightweight structure with proper damping allows tracking at a light force. In the body, the frame is moulded from high-strength resin together with the magnet and terminal pins and sits in a light-alloy precision-engineered case, to remove unnecessary resonance sources. Four screws can be used to fix the cartridge to the head shell.
A two-way damping system, specific to Denon, suppresses changes caused by room temperature and keeps the frequency characteristics level. All published figures are based on an ambient temperature of 20 °C, and Denon asks that the tracking force stay within the tolerance even in a cold room. Mounting dimensions comply with JIS and EIA standards and suit almost any head shell. The stylus is not user-replaceable - a worn tip is exchanged by Denon service at a replacement price. Supplied accessories are a stylus cleaning brush and a set of fixing screws, and the dummy transport shell doubles as an overhang gauge and a stylus magnifier.
Pairing
The output is too low for an MM input, so a step-up transformer or a head amplifier for MC cartridges is required. A phono stage with an MC input at the recommended load also works.
Alternatives
The DL-103 is the other long-running Denon moving-coil cartridge, originally developed for broadcast use.