The UD-701N is the flagship USB DAC/network player from TEAC of Japan, and it also includes an analogue preamplifier and a headphone amplifier. It is priced at USD 4,299.99 and comes in black or silver. Instead of a generic DAC IC, TEAC uses its own discrete converter.
Key specs that matter
Two TEAC ΔΣ discrete DACs accept PCM up to 384 kHz/32-bit and DSD up to 22.5 MHz via USB and network. Digital inputs are USB Type B, 2 coaxial and 2 optical (up to 192 kHz), Ethernet (1000Base-T) and two USB Type A ports for flash drives. Analogue inputs are XLR (50 kOhm) and RCA (25 kOhm). Line outputs are XLR (220 ohms) and RCA (180 ohms), set to Fixed 0 dB, Fixed +6 dB, Variable or Off, with up to 12 Vrms and 6.0 Vrms in Variable mode. The 4-pin XLR headphone output gives 700 mW + 700 mW and the 6.3 mm jack 500 mW + 500 mW into 32 ohms, for 16 - 600 ohm headphones. A BNC clock sync input takes 10 MHz (50 ohms). Frequency response is 5 Hz - 80 kHz (+1/-5 dB), THD is 0.002% and S/N is 108 dB (A-weighted, 1 kHz). It measures 444 x 111 x 334 mm and weighs 11.8 kg.
Engineering and use context
TRDD 7, the TEAC Reference Discrete DAC, is discrete circuitry with an FPGA running TEAC's original algorithms. DSD is passed as is, while PCM goes through a ΔΣ modulator and is converted to 1-bit or multi-bit, as the user chooses. RDOT-NEO upconverts PCM 2, 4 or 8 times, to 384 kHz maximum, and the MQA full decoder also supports the digital inputs.
From independent left and right toroidal transformers through the D/A section to the analogue output stage, the circuit is dual mono, with fully balanced transmission after the D/A section. Two further toroidal transformers supply the network module and the digital control section. Volume is set by TEAC-QVCS, a variable gain amp control with four circuits for L+, L-, R+ and R- in 0.5 dB steps. TEAC-HCLD2 output buffers use diamond buffer amplifiers, driven differentially for balanced and in parallel for unbalanced output. Four diamond buffers drive the headphone amplifier, and its XLR output switches between balanced and active ground. Transformers sit on a floating structure isolated from the bottom panel.
Streaming covers OpenHome, Roon Ready, Spotify Connect, Tidal Connect, Qobuz and TuneIn, and Bluetooth accepts LDAC, LHDC and aptX HD.
Pairing
A power amplifier or active monitors connect directly to the variable XLR or RCA outputs. Analogue sources such as a phono stage connect to the XLR or RCA inputs. An external master clock connects to the BNC input.
Alternatives
TEAC lists no other D/A converter in its current range.