The TruStream is a network player from Leak, the British brand based in Huntingdon, Cambridgeshire. Its walnut-veneer cabinet and brushed-aluminium fascia follow the styling of the Stereo 130 and Stereo 230 integrated amplifiers it was designed to complement. The player went on sale in March 2026 at a recommended EUR 1,199 (USD 1,495 in the US).
Key specs that matter
Conversion uses the ESS Sabre ES9038Q2M 32-bit DAC. Sampling rates are PCM 44.1 kHz - 768 kHz and DSD64, DSD128, DSD256 (DoP) and DSD512 (PC USB). Variable analogue output is 0 - 2.05 Vrms on RCA and 0 - 4.1 Vrms on XLR (0 dBFS, 1 kHz). Frequency response is 20 Hz - 20 kHz (±0.5 dB, ref. 1 kHz), and THD is below 0.001% (1 kHz, 2.05 Vrms). Signal-to-noise ratio (A-weighted) is above 116 dB on RCA and above 120 dB on XLR, with output impedance of 120 ohms (RCA) and 56 ohms (XLR). Both coaxial and optical digital outputs run up to 192 kHz/24-bit at 500 mVpp ±50 mVpp into 75 ohms. Net weight is 6.5 kg, and dimensions are 330 x 118 x 278 mm (W x H x D).
Engineering and use context
Streaming is powered by Silent Angel, a specialist in low-noise digital audio transmission. Leak says this platform gives stable network performance, precise clocking and low-jitter data handling. An RK3399 processor with ARM Cortex-A72 cores at 2.0 GHz and Cortex-A53 cores at 1.5 GHz runs it. For the network there is 10/100/1000Base-T Ethernet or Wi-Fi with WPS pairing, and the Wi-Fi module supports 802.11 a/b/g/n/ac on 2.4/5 GHz.
Services include Spotify Connect, TIDAL Connect, Qobuz Connect, TuneIn, internet radio and AirPlay 2, and the TruStream is Roon Ready with gapless playback. Files are read from SMB/CIFS and DLNA shares or from USB drives formatted as single-partition FAT32 or exFAT. On the rear panel are a USB Type-C PC input, two USB-A storage ports, a USB-A port for MCU updates and two USB-A ports for USB audio output. Supported formats are DSF, DIFF, FLAC, ALAC, WAV, AIFF, CUE, APE, MP3, WMA, AAC and OGG.
The headphone output uses a dedicated current-feedback amplifier with an output impedance of 2.35 ohms. It is rated for loads of 20 - 600 ohms, with THD below 0.01% (1 kHz, 50 mW). Standby consumption is below 0.5 W. Control is by the LEAK TruStream app for iOS and Android or by the remote control supplied with the player.
Pairing
The matching amplifiers are the Leak Stereo 130 and Stereo 230. An amplifier with balanced XLR or RCA line inputs is required for the analogue outputs. The digital outputs allow an external DAC.
Alternatives
Leak has no other network player in its current range.