Hifiverse

Streamers — Primare NP5 Prisma MK2

Description, images, technical data and specifications

Primare NP5 Prisma MK2
Image source - (c) Primare

The NP5 Prisma MK2 is a compact network player from Primare of Sweden. It has digital outputs only and no built-in DAC, and it brings Primare's Prisma control and connectivity technology to virtually any system with a digital input. For the MK2 version Primare replaced the re-clocking chip of the original NP5 Prisma with a readily available SRC chip in a redesigned circuit. European list price is EUR 600.

Key specs that matter

Digital outputs are one coaxial RCA and one optical Toslink, with the output sample rate selectable at 44.1, 48, 96 or 192 kHz/24-bit, in Native or Fixed mode. A USB-A input plays files up to 192 kHz/24-bit and DSD128 (5.6 MHz). WAV, LPCM, AIFF, FLAC, ALAC, WMA and OGG are supported up to 192 kHz/24-bit, and MP3 and AAC up to 48 kHz/16-bit. Network connection is a 10/100 Mbit Ethernet port or dual-band 2.4/5 GHz WLAN (IEEE 802.11 a/b/g/n/ac). Streaming covers AirPlay 2, Bluetooth, Chromecast built-in, Roon Ready, Spotify Connect, DLNA/UPnP and Prisma with embedded radio, Qobuz and TIDAL. Power consumption is below 3.6 W in operation and below 2.9 W in standby. Dimensions are 143 x 36 x 125 mm (W x H x D) with connectors, and weight is 0.5 kg. Its only colour is black.

Engineering and use context

Primare describes Prisma as a connectivity and control platform made of a bundle of technologies. The Prisma app is used mainly to set up the player and to control network-connected hard drives, while each streaming service is operated from its own app. Through Prisma, Qobuz and TIDAL play gapless at up to 24/192 kHz. Chromecast built-in adds voice control through Google Home speakers and Google Assistant, and Prisma firmware updates arrive automatically through the Google Home app. Multi-room and multi-zone playback is available through AirPlay 2, Spotify Connect, Chromecast built-in, Roon and Prisma.

With the MK2 circuit, DoP (DSD over PCM) output becomes a setting option when Roon Ready is used with a DoP-capable DAC. MQA passthrough sends TIDAL Masters and MQA files from a NAS to a connected MQA-capable DAC. An RS232 port with an included cable gives Prisma app control of volume, mute, power and input selection on earlier Primare models, even when they play from analogue inputs. Primare designed the NP5 to be small enough to sit inconspicuously in any stereo or multichannel system.

Pairing

A DAC, integrated amplifier or AV receiver with a coaxial or optical digital input is required. Earlier Primare amplifiers with an RS232 port connect for app control.

Alternatives

The SC15 Prisma MK2 is the Primare network player with a built-in DAC and preamplifier.

Specifications

  • Model name

    NP5 Prisma MK2

  • Has internal DAC

    Yes

  • DSD compatability

    N/A

  • Parameters

    N/A

  • DSP processing

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs level (balanced) (V)

    N/A

  • Analog outputs level (single-ended) (V)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    143 x 36 x 125

  • Weight (kg)

    0.5

  • Official link