Hifiverse

Streamers - ONYX Mircale

Description, images, technical data and specifications

ONYX Mircale
Image source - (c) ONYX

The Miracle is a three-piece streamer stack from ONIX, a hi-fi name whose products date back to Brighton in 1979 and which is now managed from Taiwan in cooperation with the Chinese manufacturer Shanling. It consists of the XM10 streamer and portable player, the XP10 DAC and headphone amplifier and the XPS10 linear power supply. Docked into the XP10, the XM10 forms the streaming source, and it can also be used on its own as a portable player. Launch was on 4 September 2023 at USD 4,999 and EUR 4,990, in a black finish.

Key specs that matter

PCM is supported up to 768 kHz/32-bit and DSD up to DSD512. Digital inputs on the XP10 are Bluetooth, USB, optical, coaxial, USB drive and the XM10 dock, and there is one RCA analogue input. Line outputs are RCA at 2.2 V and XLR at 4.4 V, and the coaxial and optical outputs carry PCM up to 192 kHz/24-bit. Headphone outputs are 3.5 mm and 6.35 mm single-ended, 4.4 mm and XLR balanced. Single-ended output power is 1757 mW into 32 ohms and 224 mW into 300 ohms (output impedance 0.4 ohms). Balanced output power is 5600 mW into 32 ohms and 850 mW into 300 ohms (output impedance 2.4 ohms). Frequency response is 20 Hz - 40 kHz (-0.5 dB). Signal-to-noise ratio is 121 dB single-ended and 124 dB balanced (32 ohms, A-weighted).

Engineering and use context

Conversion in the XP10 uses the ESS ES9039PRO, an 8-channel DAC chip, with ONIX's in-house Brighton architecture as a high-speed I/V conversion circuit. Low-pass filtering is done by OPA2211 op-amps, and a PGA2311 provides volume control in 256 steps. Its USB input chip is an XMOS XU316. An Ingenic X2000 system platform runs the 3.18-inch touchscreen, and remote control is through the Eddict Player app.

Inside the XM10 are a Snapdragon 665 CPU with open Android 10, a 6-inch 2160 x 1080 touchscreen and hardware buttons. Its own AKM AK4493SEQ DAC and Ricore RT6863 amplifiers give 125 mW single-ended and 230 mW balanced into 32 ohms, with a 4.4 mm balanced output through an adapter. FPGA technology and KDS crystal oscillators are used for the digital transport to the XP10. Bi-directional Bluetooth 5.0 transmits LDAC, LHDC, aptX HD, aptX and SBC, and the 3350 mAh battery lasts up to 18 hours.

Each XPS10 has two Noratel 30 W toroidal transformers, a 1.9-inch display and an output voltage adjustable from 12 to 24 V. Mains input is 100-110 V or 220-230 V depending on region. All three units are CNC-machined, with a gold-plated control wheel.

Pairing

The RCA and XLR pre outputs connect to an integrated amplifier or to power amplifiers. Headphones with 3.5 mm, 6.35 mm, 4.4 mm or XLR plugs connect directly to the XP10.

Alternatives

The Zenith XMT20 is the ONIX streaming transport of the Zenith series, introduced in January 2026.

Specifications

  • Model name

    Mircale

  • Has internal DAC

    Yes

  • DSD compatability

    Yes

  • Parameters

    up to 32 bit / 768 kHz and DSD512

  • DSP processing

    N/A

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    2.4

  • Output Impedance (single-ended) (Ω)

    0.4

  • Analog outputs level (balanced) (V)

    N/A

  • Analog outputs level (single-ended) (V)

    N/A

  • Signal to Noise Ratio (dB)

    121 / 124

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    0.0003 (Balanced) + 0.0004 (Unbalanced)

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link