Hifiverse

Streamers — dCS Lina DAC X

Description, images, technical data and specifications

dCS Lina DAC X
Image source - (c) dCS

Lina DAC X is a network DAC from dCS, hand-assembled and tested in Cambridgeshire, UK. It joins the Lina series next to the Lina Network DAC, Lina Master Clock and Lina Headphone Amplifier, and differs from the Lina Network DAC by its physical volume dial, infrared remote control and full-width chassis. Shipping began in June 2025 at GBP 13,500 in the UK and USD 15,500 in the US. dCS lists playback from computers, storage drives and CD transports besides streaming.

Key specs that matter

Sample rates are 44.1-384 kS/s at up to 24 bits, plus DSD64 and DSD128, native DSD and DoP depending on the input, and FLAC, WAV, AIFF and MQA. Digital inputs are 2 x AES/EBU on 3-pin XLR (44.1-192 kS/s, up to 384 kS/s as a Dual AES pair), S/PDIF on BNC and on RCA (44.1-192 kS/s), Toslink (44.1-96 kS/s) and asynchronous USB Type B (44.1-384 kS/s PCM, DSD and DSDx2). Output levels are 0.2 V, 0.6 V, 2 V or 6 V RMS for a full-scale input, set in the menu. Output impedance is 3 ohms balanced and 52 ohms unbalanced, with 600 ohms maximum load and 10-100 kohms recommended. Frequency response is ±0.1 dB, 10 Hz - 20 kHz (filter 1). Residual noise at the 6 V setting is better than -113 dB0 with 24-bit data and -96 dB0 with 16-bit data (20 Hz - 20 kHz, unweighted), and L-R crosstalk is better than -115 dB0. It measures 122 x 444 x 356 mm (H x W x D) and weighs 14 kg.

Engineering and use context

Inside are the dCS Ring DAC and the Digital Processing Platform on a flex-rigid PCB, with a StreamUnlimited Stream800 streaming module. Upsampling is multi-stage DXD oversampling with switchable DSD upsampling (1-bit 2.822 or 3.07 MS/s) and DSDx2 upsampling (1-bit 5.644 or 6.14 MS/s). In PCM mode up to 6 filters per sample rate are offered, and DSD mode has 5 filters. Two Word Clock inputs on 75 ohm BNC connectors accept 44.1-192 kHz. Its balanced outputs are electronically balanced and floating. A USB Type A port reads mass storage devices, navigated in the dCS Mosaic app. Streaming covers UPnP, Qobuz, Deezer, TIDAL, Spotify, QQ Music, internet radio and Roon Ready, and Audirvana and JPLAY are supported. Crossfeed settings are Standard, dCS Expanse 1 and dCS Expanse 2.

Pairing

An amplifier or preamplifier with a balanced XLR or single-ended RCA line input is required. The output level settings allow matching to the input sensitivity of the following stage.

Alternatives

The dCS Lina Network DAC has the same Ring DAC and streaming platform in a half-width case without the volume dial.

Specifications

  • Model name

    Lina DAC X

  • Has internal DAC

    Yes

  • DSD compatability

    Yes

  • Parameters

    up to 24 bit / 384 kHz and DSD128

  • DSP processing

    N/A

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Gain (dBu)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    3

  • Output Impedance (single-ended) (Ω)

    52

  • Analog outputs level (balanced) (V)

    N/A

  • Analog outputs level (single-ended) (V)

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    122 x 444 x 356

  • Weight (kg)

    14

  • Official link

More components