Hifiverse

Streamers - AVM Evolution MP 3.3

Description, images, technical data and specifications

AVM Evolution MP 3.3
Image source - (c) AVM

The Evolution MP 3.3 is a media player from AVM Audio Video Manufaktur of Malsch, Germany, founded in 1986. It combines the AVM X-STREAM Engine streaming platform, a slot-in CD drive to the Red Book standard and a DAC section in one chassis, and it operates exclusively with transistor technology. Its sister model, the Evolution MP 5.3, has a tube line stage with tubes developed for AVM. The screwless aluminium housing comes in silver or black, and a CELLINI version with a chrome front is optional.

Key specs that matter

Conversion uses Double-Quad DACs (ESS 9028 PRO), with four D/A converters working in parallel per channel. Streaming reaches 32-bit/384 kHz PCM and DSD256. Frequency response is 0 Hz - 100 kHz (-3 dB), distortion is below 0.001%, and signal-to-noise ratio and channel crosstalk attenuation are both better than 100 dB. Output impedance is 47 ohms on RCA and 94 ohms on XLR. PRE OUT headroom is 8.5 V (1% THD) and LINE OUT level is 2.5 V. Digital inputs comprise coaxial S/PDIF up to 192 kHz/24-bit, optical up to 96 kHz/24-bit and HDMI ARC up to 192 kHz/24-bit, with coaxial and optical digital outputs alongside. Bluetooth 5.0 supports AVRCP 1.5 and A2DP. A rear USB 2.0 port accepts hard drives and USB sticks formatted FAT16, FAT32 or NTFS. Networking is 100 Mbit/s LAN or dual-band Wi-Fi (802.11a/b/g/n/ac) with two antennas. Dimensions are 430 x 122 x 330 mm (W x H x D), weight is 7.5 kg, and typical power consumption is below 18 W.

Engineering and use context

Streaming services on the X-STREAM Engine include Spotify Connect, Qobuz, TIDAL Connect, HIGHRESAUDIO, internet radio and AirPlay 2, and the player is Roon Ready. UPnP playback and the RoomConneXion multiroom system are also supported. File formats include WAV, FLAC, ALAC, AIFF, DSD, AAC, MP3 and Ogg.

Volume control is entirely analogue. Both the digital and the analogue outputs can be set to variable or fixed level. Its digital inputs are signal-sensitive and power the player on when a signal is detected. Through the RC X app for iOS and Android, upsampling rates and filter characteristics can be adjusted from the listening position. A 5 - 20 V trigger input is joined by two 12 V trigger outputs, and the second is switched with a delay after the first to protect against current surges.

Each unit is handcrafted at the factory in Malsch and goes through a multi-day burn-in. An RC 3 full aluminium remote control is included.

Pairing

At variable level the analogue outputs can drive a power amplifier or active loudspeakers directly. At fixed level they connect to a line input of an integrated amplifier or preamplifier. The HDMI ARC input accepts the audio of a television.

Alternatives

The Evolution MP 5.3 is the same media player with a tube line stage.

Specifications

  • Model name

    Evolution MP 3.3

  • Has internal DAC

    Yes

  • DSD compatability

    Yes

  • Parameters

    up to 32 Bit/384 kHz and DSD256

  • DSP processing

    N/A

  • Frequency response low +/- 3dB (Hz)

    0

  • Frequency response high +/- 3dB (Hz)

    100 000

  • Gain (dBu)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    94

  • Output Impedance (single-ended) (Ω)

    47

  • Analog outputs level (balanced) (V)

    N/A

  • Analog outputs level (single-ended) (V)

    N/A

  • Signal to Noise Ratio (dB)

    >100

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    < 0.025

  • Dimensions (mm)

    430 x 122 x 330

  • Weight (kg)

    7.5

  • Official link