Hifiverse

Streamers - Denon DNP-2000NE

Description, images, technical data and specifications

Denon DNP-2000NE
Image source - (c) Denon

The DNP-2000NE is a high-resolution network audio player from Denon with HEOS Built-in, a USB-DAC input and an HDMI ARC input in a full-width chassis. Denon presents it as a way to add streaming and TV sound to an existing system. It was launched at GBP 1,400 in black or silver and GBP 1,600 in graphite silver.

Key specs that matter

Conversion uses four ESS ES9018K2M DAC chips rated at 384 kHz/32-bit. At the line output, frequency response is 2 Hz - 50 kHz (-3 dB) for DSD and 2 Hz - 20 kHz for 44.1 kHz PCM. Signal-to-noise ratio is 120 dB (DSD) and 118 dB (PCM), dynamic range is 112 dB (DSD) and 118 dB (PCM), and harmonic distortion is 0.0006% (DSD) and 0.0008% (24-bit PCM). Output level is 2.2 Vrms fixed and 4.5 Vrms variable. Its headphone amplifier delivers 150 mW into 32 ohms at high gain, with low, mid and high gain settings. Dimensions are 434 x 107 x 421 mm (W x H x D) with antennas, or 374 mm deep without them, and weight is 9.7 kg.

Engineering and use context

Ultra AL32 Processing is Denon's data interpolation algorithm for PCM signals up to 192 kHz/24-bit. According to Denon, it interpolates points that should exist before and after the original samples to obtain a waveform close to the original signal. A DAC master clock is the reference for the four DACs and the USB-DAC input, and a jitter reducer is included. The rear USB-B input operates in asynchronous mode and accepts PCM up to 384 kHz/32-bit and DSD up to 11.2 MHz via DoP. Isolators are used on USB-B and on the other digital inputs.

Inside, the analogue and digital circuit boards are isolated from each other, and an independent power line from the EI power transformer supplies the analogue circuit. Its output circuit follows a minimum signal path in a symmetric circuit layout. Front panel, volume knob and buttons are aluminium, the SECC steel covers are 1.0 mm thick, the bottom plate is doubled and an extra metal plate stiffens the chassis.

Over the network it streams WAV, FLAC and ALAC up to 192 kHz/24-bit and native DSD up to 5.6 MHz, with gapless playback. AirPlay 2, Roon Ready certification, Spotify Connect, Tidal and TuneIn are supported, and Bluetooth can transmit to wireless headphones. Voice control works through Amazon Alexa, Google Assistant or Apple Siri. It has a three-line OLED display.

Pairing

Digital inputs are two optical, one coaxial, USB-B and HDMI ARC, and one coaxial and one optical output are provided. A television with HDMI ARC connects with a single cable, and its remote then sets the volume. The variable RCA output allows direct connection to a power amplifier or active speakers. For an integrated amplifier, the fixed RCA output connects to a line input.

Alternatives

The Denon DNP-800NE is the brand's earlier and smaller HEOS network audio player.

Specifications

  • Model name

    DNP-2000NE

  • Has internal DAC

    Yes

  • DSD compatability

    Yes

  • Parameters

    up to 192 kHz / 24-bit and DSD 11,2 MHz

  • DSP processing

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    50 000

  • Gain (dBu)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs level (balanced) (V)

    N/A

  • Analog outputs level (single-ended) (V)

    N/A

  • Signal to Noise Ratio (dB)

    118

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    0.0008

  • Dimensions (mm)

    434 x 421 x 107

  • Weight (kg)

    9.7

  • Official link

Related content