Hifiverse

Streamers — Pro-Ject BT Box E HD

Description, images, technical data and specifications

Pro-Ject BT Box E HD
Image source - (c) Pro-Ject

The BT Box E HD is a Bluetooth audio receiver from Pro-Ject Audio Systems for adding wireless streaming from phones, tablets and computers to an existing hi-fi system. It belongs to the E range of the Box Design series and is built by Canor of Presov in Slovakia. It appeared in October 2022 at GBP 119 in the UK. The casing is black or white, and an outboard power supply is included.

Key specs that matter

Bluetooth version is 5.0 with the A2DP profile, and supported codecs are SBC, aptX and aptX HD. Frequency range is 2402 - 2480 MHz, sensitivity is -88 dBm and effective working range is up to 10 m with direct visibility. Nominal output level is 2.0 Vrms at 0 dBFS, and frequency response is 20 Hz - 20 kHz (-1.5 dB). Signal-to-noise ratio is >93 dB on the line output and >120 dB on the digital output. THD at 1 kHz/0 dBFS is <0.03% on the line output and <0.01% on the optical output. Channel separation at 10 kHz is <-113 dB (line out) and <-140 dB (digital out). Outputs are one pair of RCA and one optical S/PDIF (Toslink). The outboard supply is 18 V/500 mA for 220 - 240 V at 50 - 60 Hz, consumption is 50 mA maximum and standby draw is less than 1 W. Dimensions are 120 x 32 x 100 mm (115 mm with sockets), and weight is 250 g without the power supply.

Engineering and use context

Pro-Ject specifies fast auto pairing in 3 to 5 seconds and an internal memory for up to 8 wireless devices. It plays from one device at a time. To change source, the existing connection is disconnected before the next device is paired. After a signal loss of only a few seconds, for example when a phone leaves the range and returns, the receiver can reconnect automatically.

According to the manual, both outputs are active all the time, while the product page lists them as switchable. The RCA line output connects to a line input such as AUX. Its optical output goes to a D/A converter, a digital input of an amplifier or an AV receiver. Pro-Ject's Phono Box E BT5 streams over Bluetooth from a turntable to this receiver.

Pairing

A line input on an amplifier or powered speaker is required for the RCA output. A DAC, AV receiver or amplifier with an optical input can take the Toslink output.

Alternatives

The BT Box S2 HD is Pro-Ject's Bluetooth receiver in the S2 range with aptX HD.

Specifications

  • Model name

    BT Box E HD

  • Has internal DAC

    N/A

  • DSD compatability

    N/A

  • Parameters

    N/A

  • DSP processing

    N/A

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    20 000

  • Gain (dBu)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs level (balanced) (V)

    N/A

  • Analog outputs level (single-ended) (V)

    N/A

  • Signal to Noise Ratio (dB)

    >93

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    120 x 32 x 100

  • Weight (kg)

    0.25

  • Official link