Hifiverse

DACs - Analog Domain The DAC1

Description, images, technical data and specifications

Analog Domain The DAC1
Image source - (c) Analog Domain

The DAC1 is a digital to analogue converter from Analog Domain Audio GmbH of Taufkirchen, Germany, whose chief designer is Angel Despotov. Its catalogue also covers the M75 series amplifiers and the Argus and Aura loudspeakers. The DAC1 is offered with or without a volume control and in silver or full black.

Key specs that matter

S/PDIF and AES/EBU inputs accept PCM up to 192 kHz/24-bit, and the USB input accepts 44.1 kHz/16-bit up to 768 kHz/32-bit plus DSD64, DSD128 and DSD256. Inputs are 2x RCA, 1x AES/EBU, 1x Toslink and 1x USB type B. Output level is 2 Vrms (RCA) and 4 Vrms (XLR). Dynamic range is 120 dB and distortion is below 0.00035%. Power consumption is below 10 W at 115/230 V (user selectable). With a 440 x 400 mm footprint (W x D), height of approx. 90 mm and weight of approx. 12 kg, it matches the M75 amplifiers.

Engineering and use context

Every input format is converted to 24 bits and asynchronously resampled to a very high, constant data rate. A digital filter configured for the output format of the sample rate converter follows, so there are no user-selectable filter options. This filter upsamples again to set the DAC data rate as high as possible. According to Analog Domain, digital noise is pushed far above the audio band and no steep reconstruction filter is needed in the analogue stage. Conversion is done by a precision 24-bit D/A converter with a third-order sigma-delta noise shaper and a 31-level quantizer, in a differential DAC stage. All three digital blocks are synchronised to a single high-precision clock. Any CD transport with RCA, optical or AES/EBU outputs can be used without external re-clocking.

Residual distortion is approx. 0.00035% at full scale for all input formats and 0.0001% (-120 dB) at -10 dBFS. The company points out that one bit is lost with every 6 dB of level reduction, so a 16-bit DAC works at 14-bit resolution or less in quiet passages.

The USB input uses an XMOS chip, is powered internally and needs a driver only under Windows. Units delivered before December 2018 (MK1) accept PCM up to 384 kHz and DSD 2x over USB, and the MK2 USB module is a factory upgrade. The optional volume control is an analogue stepped logarithmic resistor ladder with 0.75 dB steps down to -96 dB, the same design as in the M75 amplifiers, and it can be retrofitted only at the factory.

Pairing

The XLR and RCA outputs connect to any preamplifier. With the volume control version a power amplifier can be connected directly. CD transports connect over coaxial, optical or AES/EBU, and a computer over USB.

Alternatives

Analog Domain has no other DAC in its range, and the DAC1 with volume control is the version for systems without a preamplifier.

Specifications

  • Model name

    The DAC1

  • Conversion type

    N/A

  • Engine

    N/A

  • DSD compatability

    N/A

  • Parameters

    up to 24 bit / 940 kHz and DSD256

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link