Hifiverse

DACs — TAD TAD-DA1000TX

Description, images, technical data and specifications

TAD TAD-DA1000TX
Image source - (c) TAD

The TAD-DA1000TX is a D/A converter in the Evolution series of TAD, Technical Audio Devices Laboratories of Tokyo. Besides the converter it has a line output with its own volume control and a headphone amplifier. Its sibling, the TAD-D1000TX SACD/CD player, uses the same third-generation USB engine. Finishes are silver (TAD-DA1000TX-S) and black (TAD-DA1000TX-K).

Key specs that matter

Digital inputs are 1 XLR, 2 coaxial, 1 optical and 1 USB Type B (USB 2.0 high-speed). XLR and coaxial accept 44.1 - 192 kHz, and optical 44.1 - 96 kHz. Via USB it accepts PCM up to 384 kHz/32-bit plus DSD64, DSD128 and DSD256 (2.8, 5.6 and 11.2 MHz). Digital outputs are 1 XLR and 1 coaxial. Analogue outputs are one balanced and one unbalanced, rated at 4 V and 2 V (1 kHz, 0 dB). S/N ratio is 115 dB. Frequency response is 10 Hz - 40 kHz (-1 dB) at sampling frequencies of 88.2 kHz and above, and 10 Hz - 20 kHz (-1 dB) at 44.1 kHz. The headphone jack gives 125 mW + 125 mW into 32 ohms, with a recommended impedance of 8 - 600 ohms. Power consumption is 49 W, or 0.5 W or less in standby. It measures 440 x 150 x 406 mm (W x H x D) and weighs 16.5 kg.

Engineering and use context

TAD developed its Asynchronous USB Communication Engine in-house, and this is its third generation. Playback of 352.8 and 384 kHz PCM, DSD128 and DSD256 over USB requires Windows 10 or Mac OS 10.6 and higher. Conversion uses parallel-connected, dual differential D/A converter ICs, one set for each channel. Their master clock is the UPCG, an ultra-high-precision crystal generator with an ultra-high C/N (carrier-to-noise) ratio. After the converters, a discrete current-to-voltage (I/V) conversion circuit reduces residual noise at high slew rates, and the analogue circuit is a high-slew-rate design.

In the power supply, the internal coil wire of the high-output toroidal primary transformer is connected directly to the supply circuit. Analogue and digital circuits have independent power supply transformers to avoid mutual interference. The headphone amplifier is driven by its own independent power supply with a separate coil wire, and it has a dedicated D/A conversion circuit and a discrete output buffer. In black, the TAD-DA1000TX is a built-to-order model.

Pairing

A power amplifier with balanced or unbalanced inputs connects directly to the variable line outputs. A separate preamplifier is not required. A computer connects to the USB Type B input, and a disc transport to the XLR or coaxial input.

Alternatives

TAD has no other stand-alone D/A converter in its current range.

Specifications

  • Model name

    TAD-DA1000TX

  • Conversion type

    N/A

  • Engine

    N/A

  • DSD compatability

    Yes

  • Parameters

    up to 32bit / 384 kHz and DSD256

  • Frequency response low +/- 3dB (Hz)

    10

  • Frequency response high +/- 3dB (Hz)

    40 000

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    115

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    440 x 150 x 406

  • Weight (kg)

    16.5

  • Official link