The S15 is a full-size desktop high-res audio streamer from FiiO, with an all-metal case of the standard 430 mm width. It runs Android 12 on a Qualcomm Snapdragon 660, with 4 GB of RAM and 64 GB of storage, of which about 46 GB is available. An automotive-grade colour touchscreen with 400 x 1280 resolution sits in the front panel, and the finishes are black and silver.
Key specs that matter
Conversion uses the AKM AK4191 and AK4499EX pair. The balanced XLR outputs reach 8.9 Vrms in preamp mode and 4.8 Vrms at fixed level, with 4.5 Vrms and 2.4 Vrms on RCA. On the XLR pre-out FiiO specifies SNR of 131 dB or more (A-weighted), noise floor below 2.6 µV, THD+N below 0.00023% (1 kHz, 0 dB, 10 kohms) and crosstalk of 126 dB or more. Frequency response is 20 Hz - 20 kHz (<0.3 dB) and 20 Hz - 70 kHz (<2.8 dB). USB DAC input accepts 768 kHz/32-bit and native DSD512, coaxial, AES and HDMI inputs 192 kHz/24-bit, and optical 96 kHz/24-bit. Coaxial and AES outputs carry 384 kHz/24-bit and DSD128, and native decoding reaches 384 kHz/32-bit and DSD256. Dimensions are about 430 x 274.5 x 89.5 mm, and weight is about 5.6 kg.
Engineering and use context
According to FiiO, the AK4191 and AK4499EX combination fully separates the digital and analogue portions, and AKM DWA Routing Technology is used. OPA1612 low-noise precision op-amps are in the I/V, LPF and other audio sections. Its design is fully balanced from DAC decoding to the preamplifier stage. Two ACCUSILICON AS318-B femtosecond oscillators run at 45.1584 MHz and 49.152 MHz, and FiiO's DAPS system plays audio without resampling at both application and system level.
A 35 W low-noise linear supply has a custom transformer and four 4700 µF ELNA capacitors, followed by a multi-stage analogue supply with precision LDO regulators. Digital, analogue and power sections are physically separated. A 16-core XMOS XU316 is the USB decoder. A Qualcomm QCC5125 provides Bluetooth 5.1 reception with LDAC, aptX Adaptive, aptX HD and aptX LL, and transmission is Bluetooth 5.0 with LDAC and LHDC. Network playback covers DLNA, AirPlay and Roon Ready, plus UPnP, SMB and WebDAV shares, over dual-band Wi-Fi or 100M Ethernet. Local files play from an M.2 drive of up to 2 TB, a microSD card or USB drives. Control is by two knobs, two virtual keys, a Bluetooth remote with gesture control and an app, and a 10-band PEQ is built in.
Pairing
RCA and XLR outputs switch between fixed level for an integrated amplifier and variable level for a power amplifier. HDMI ARC connects a TV. Coaxial, AES, optical and HDMI I2S outputs connect an external DAC, and a 3.5 mm trigger output is on the rear panel.
Alternatives
The FiiO K17 also uses an AK4191 front end, with two AK4499EX chips and an added headphone amplifier.