Hifiverse

DACs - McIntosh MDA200

Description, images, technical data and specifications

McIntosh MDA200
Image source - (c) McIntosh

The MDA200 is a stand-alone two-channel D/A converter from McIntosh, intended to add digital playback to an all-analogue system or to replace an outdated converter. It shipped in the USA and Canada from November 2022 at USD 5,000 and sold in the UK at GBP 4,995. McIntosh now lists it as retired with limited availability, and it carried a 3-year limited warranty.

Key specs that matter

Conversion takes place in the DA2 Digital Audio Module, with a Quad Balanced, 8-channel, 32-bit DAC. Seven digital inputs are provided - 2 coaxial, 2 optical, 1 USB, 1 MCT and 1 HDMI (ARC). Over USB it accepts native DSD up to DSD512 and DXD up to 384 kHz, and the coaxial and optical inputs decode up to 24-bit/192 kHz. Frequency response is 20 Hz - 20 kHz (+0, -0.5 dB) and 5 Hz - 60 kHz (+0, -3 dB, source dependent). THD is 0.005%, and signal-to-noise ratio and dynamic range are both 100 dB. Maximum output is 4.0 V RMS balanced and 2 V RMS unbalanced in fixed mode, or 0-16 V RMS and 0-8 V RMS in adjustable mode, at an output impedance of 100 ohms. Dimensions are 444.5 x 98 x 399.5 mm (W x H x D), weight is 6.1 kg and power consumption is 35 W.

Engineering and use context

Its DA2 module is replaceable, and McIntosh states that it can be exchanged for a newer Digital Audio Module if one is introduced. The MCT input is for the McIntosh MCT series of SACD/CD transports. Through the audio-only HDMI (ARC) input a compatible TV can be connected, and multichannel Dolby and DTS formats are converted to 2-channel audio. That input passes no video and accepts no non-TV source. The DA2 also has Roon Tested designation from Roon Labs.

Analogue outputs are one balanced and one unbalanced pair. From the factory the unit is set to fixed output, and a variable mode can be selected instead, with volume set by the front-panel ADJUST knob or the supplied remote control. In variable mode it connects directly to a power amplifier in a system with digital sources only.

This is a solid-state design with no output meters. Black glass faceplate, illuminated logo, rotary control knobs, custom machined aluminium end caps and a display with adjustable brightness make up the front. On the rear panel are a data input and output, a power control input and output, IR sensor inputs and an RS232 port.

Pairing

A preamplifier or integrated amplifier with XLR or RCA line inputs is required in fixed mode. In variable mode a stereo power amplifier is enough. The matching SACD/CD transport is the McIntosh MCT500 over the MCT link.

Alternatives

The McIntosh D150 is a digital preamplifier and DAC with USB, coaxial, optical and MCT inputs.

Specifications

  • Model name

    MDA200

  • Conversion type

    N/A

  • Engine

    N/A

  • DSD compatability

    N/A

  • Parameters

    N/A

  • Frequency response low +/- 3dB (Hz)

    5

  • Frequency response high +/- 3dB (Hz)

    60 000

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    4

  • Output Level (single-ended) (V)

    2

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    100

  • Output Impedance (single-ended) (Ω)

    100

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    100

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    0.005

  • Dimensions (mm)

    444.5 x 98 x 399.5

  • Weight (kg)

    6.1

  • Official link