The M3x DAC is a 32-bit/192 kHz upsampling digital-to-analogue converter from Musical Fidelity, made in the EU and presented by the company as high-end made affordable. In the M3 series it sits alongside the M3scd CD player, the M3si integrated amplifier and the M3x Vinyl phono stage. A Burr-Brown PCM1795 DAC chip is combined with an SRC4392 sample rate converter, and both single-ended and balanced outputs offer fixed or variable level.
Key specs that matter
Digital inputs are two coaxial and two optical, each up to 24-bit/192 kHz stereo PCM, plus one USB Audio Class 2.0 type B input for PCM up to 32-bit/192 kHz and DSD256 (DoP and native). Two digital PCM filters and two analogue DSD filters are selectable. Output level at 0 dBFS is 2 V RMS on the RCA pair and 4 V RMS on the XLR pair, and output impedance is below 50 ohms. Frequency response is -0.2 dB at 20 Hz, +0.1 dB at 20 kHz and +1.5 dB at 70 kHz. THD is below 0.005% (1 kHz, 0 dBFS), signal-to-noise ratio is above 107 dB (A-weighted, 1 kHz, 0 dBFS), and channel separation is better than -115 dB (10 kHz, 0 dBFS). Linearity stays within 0.2 dB down to -100 dB, and total correlated jitter is below 48 ps peak to peak. Maximum consumption is 15 W (below 0.5 W in standby). The case measures 440 x 100 x 363 mm (W x H x D) and weighs 6.8 kg.
Engineering and use context
All PCM signals are re-clocked by the SRC4392 and upsampled to 192 kHz before conversion, and Musical Fidelity says this implementation was chosen to reach low distortion levels. DSD files are not upsampled and are played in their original format. Each of the single-ended RCA and balanced XLR outputs has its own output buffer, specified for very low noise, large output voltage swing, high current drive, wide gain bandwidth and a fast slew rate.
On the mains side, an industrial-grade power socket with EMI filter and DC blocker stops interference and transformer hum. Power comes from a toroidal transformer with low core saturation and low electromagnetic radiation. A heavy steel case protects the circuits against external electromagnetic fields, and the front panel is milled from an extruded aluminium profile. Mains voltage is set internally to 230 V or 115 V, with 100 V as an option.
Pairing
With the outputs set to variable, the M3x DAC can drive a power amplifier or active speakers directly. The XLR outputs require an amplifier with balanced inputs. Within the M3 series, the matching integrated amplifier is the M3si.
Alternatives
The M6x DAC is Musical Fidelity's higher-level DAC, with two ES9038Q2M converters in dual differential mode.