The LM-32DAC is a tube D/A converter from Line Magnetic, the Chinese maker best known for its reproductions of Western Electric designs. It was launched in July 2021 at EUR 2,499. Its analogue section has two output modes, a tube stage and a transistor stage, selected from the front panel, and both work from the same converter.
Key specs that matter
Conversion uses the ESS ES9028PRO DAC chip, and the USB input has an XMOS asynchronous receiver. PCM is accepted up to 32-bit/384 kHz at 44.1, 48, 88.2, 96, 176.4, 192, 352.8 and 384 kHz, and DSD64, DSD128 and DSD256 are decoded natively. Five digital inputs are provided - AES/EBU, BNC, USB, optical and coaxial, with an input impedance of 75 ohms. Frequency response is 15 Hz - 50 kHz. In tube mode output impedance is 2 kohms, THD is 0.5% and S/N is 92 dB. Transistor mode gives 600 ohms, 0.02% and 98 dB. Power consumption is 24 W. Dimensions are 430 x 325 x 105 mm (W x D x H), and net weight is 6.7 kg.
Engineering and use context
Line Magnetic specifies an isolated dual-rail power architecture. An O-core transformer with high-speed, low-noise rectification supplies the digital section. For the analogue section there is a separate EI-core transformer with a 6Z4 tube rectifier. According to the maker, the dedicated supply to each section eliminates crosstalk between them.
Two ECC802S double triodes, a 12AU7 type, are used in the tube output stage. The transistor output stage is based on operational amplifiers. A high-definition LCD display is provided for status monitoring.
Line Magnetic lists the LM-32DAC together with the LM-32CD tube CD player in its Audio Source range.
Pairing
A preamplifier or integrated amplifier with a high-impedance line input is required for the tube mode. A CD transport or network streamer with a coaxial, BNC, AES/EBU or optical output connects to the digital inputs, and a computer connects over USB.
Alternatives
The LM-502CA is an earlier Line Magnetic tube DAC with switchable tube and solid-state outputs.