Hifiverse

DACs — FiiO K15

Description, images, technical data and specifications

FiiO K15
Image source - (c) FiiO

The K15 is a desktop network streamer, DAC, preamplifier and headphone amplifier from FiiO of Guangzhou, China. It sits below the K17 in the K series and has the same 244.6 x 213 x 66.8 mm chassis dimensions, at a lighter weight of about 2.1 kg. Finishes are black or silver, and the European price was EUR 499.17 including 20% VAT.

Key specs that matter

Digital-to-analogue conversion uses two AKM AK4497S DACs, with an XMOS XU316 for USB decoding. Over USB the K15 accepts PCM up to 768 kHz/32-bit and native DSD512, coaxial up to 192 kHz/24-bit and DSD64, and optical up to 96 kHz/24-bit. Streaming and local playback reach 384 kHz/32-bit and DSD256. In ultra high gain the balanced 4.4 mm and XLR4 outputs are rated at about 3000 mW + 3000 mW into 32 ohms and 700 mW into 300 ohms (THD+N <1%). The single-ended output gives about 1400 mW into 32 ohms and 180 mW into 300 ohms. Single-ended THD+N is <0.00054% (1 kHz, -12 dB, 32 ohms) and SNR is ≥122 dB. Line outputs deliver 2.4 Vrms from RCA and 4.8 Vrms from XLR3 (1 kHz, 10 kohms). MQA is fully decoded.

Engineering and use context

An X2000 SoC is the main controller and an ESP32-S3 is the MCU. Bluetooth 5.1 reception uses a QCC5125 chip with SBC, AAC, aptX, aptX LL, aptX HD, aptX Adaptive and LDAC. Its headphone amplifier is a class AB transistor current-boosting circuit with a complementary MJE243G/MJE253G pair. Power, digital and analogue sections each lie on separate physical boards. A built-in 30 W supply accepts 85 - 305 V AC, and a 12 V/2.5 A DC inlet allows a higher-performance external linear supply. Two Accusilicon AS318-L crystal oscillators run at 45.1584 MHz and 49.152 MHz.

Network connection is by Gigabit Ethernet or an AP6256 Wi-Fi module on 2.4 GHz and 5 GHz. Eight working modes are available - USB DAC, coaxial, optical, line in, balanced in, Bluetooth, streaming and local playback. A 10-band PEQ works in every mode except the line and balanced analogue inputs. Control is by touch display, knob, remote or the FiiO Control app, and there are five gain modes from low to ultra high. The box holds the remote, two USB cables, a spare fuse, an XLR4 plug cover and a headphone plug adapter.

Pairing

FiiO specifies headphones of 8 - 150 ohms single-ended and 8 - 350 ohms balanced. Output impedance is <1 ohm single-ended and <1.5 ohms balanced. RCA and 4.4 mm balanced line inputs accept an analogue source, and the RCA and XLR3 line outputs connect to a power amplifier or active speakers.

Alternatives

The K17 is the higher model in FiiO's K series, with an AK4191 and two AK4499EX DACs, a 31-band PEQ and a 35 W linear power supply.

Specifications

  • Model name

    K15

  • Conversion type

    N/A

  • Engine

    N/A

  • DSD compatability

    Yes

  • Parameters

    up to PCM 32/768 and DSD512

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link

Related content