Hifiverse

DACs - Audioengine HXL

Description, images, technical data and specifications

Audioengine HXL
Image source - (c) Audioengine

The HXL is a portable balanced headphone amplifier and hi-fi DAC from Audioengine, the American company founded in 2005. Audioengine launched it on 6 October 2025 at an MSRP of USD 169. The HXL plugs into the USB-C port of a smartphone, tablet or computer, and its outputs are a 4.4 mm balanced socket and a 3.5 mm single-ended jack.

Key specs that matter

The DAC chipset is an SA9312 USB controller with dual Cirrus Logic CS43131 converters, and the headphone amplifier is an LME49726. Its USB-C input is UAC 2.0 class with asynchronous dual-clock transfer. PCM is supported up to 32-bit/384 kHz, DSD64 and DSD128 via DoP, and DSD256 natively. Full-scale output is 4.09 V RMS balanced and 2.06 V RMS into 600 ohms from the 3.5 mm jack. Frequency response is 20 Hz - 40 kHz (±0.1 dB). Signal-to-noise ratio is 132 dB balanced and 125 dB single-ended, THD+N is 0.0002% (112 dB), and crosstalk is -129 dB balanced and -96 dB single-ended. Output impedance is below 0.5 ohm. The body measures 48 x 15 x 10 mm.

Engineering and use context

There is no internal battery. Power comes from the host device, with a current draw of about 75 mA in standby and about 120 mA active (pink noise at 50%, 32-bit/384 kHz). USB power filtering uses two-stage redundant regulation. According to Audioengine, the balanced output gives more headroom and a quieter noise floor. Level is set by a 60-step digital hardware volume control on the side panel. The case is CNC-machined aluminium. Operating temperature is 0 - 35 °C, storage temperature is -20 - 45 °C, and humidity is 5 - 95% non-condensing. Audioengine states that no apps or drivers are needed on any major operating system. A USB-C to USB-C cable, a Lightning adapter and a setup guide are in the box. Warranty is 3 years, with a 60-day audition period.

Pairing

Recommended headphone impedance is 10 - 600 ohms. Headphones with a 4.4 mm plug use the balanced output, and those with a 3.5 mm plug use the single-ended jack. The source needs a USB-C port, or a Lightning port with the supplied adapter.

Alternatives

The Audioengine D1P is a 32-bit portable headphone amplifier and DAC with USB-C and Toslink optical inputs.

Specifications

  • Model name

    HXL

  • Conversion type

    N/A

  • Engine

    2 x CS43131

  • DSD compatability

    Yes

  • Parameters

    up to 32 bit / 384 kHz and DSD256

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    40 000

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    <=0.5 Ohm

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    132 dB (4.4 mm), 125 dB (3.5 mm)

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    0,0002

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link