Hifiverse

DACs — Lotoo Gungnir

Description, images, technical data and specifications

Lotoo Gungnir
Image source - (c) Lotoo

The Gungnir is a desktop DAC and headphone amplifier from Lotoo, the Beijing maker of the PAW portable players, with balanced and unbalanced line outputs and Lotoo's LTTP wireless link. Its name comes from Odin's spear in Norse mythology. Lotoo describes the design as full-scale audio architecture in a compact desktop form. The price is USD 3,400.

Key specs that matter

The DAC chips are 2x AK4191EQ plus 2x AK4499EX, with an AK4137EQ sample rate converter and an ADI Blackfin BF706 DSP. Sample rates reach PCM 768 kHz and DSD512. The headphone amplifier uses 12 BUF634A chips. Balanced 4.4 mm maximum output power is 8,100 mW/channel (32 ohms), 3,100 mW (100 ohms), 1,000 mW (300 ohms) and 520 mW (600 ohms). Unbalanced 3.5/6.35 mm output gives 2,200 mW/channel (32 ohms), 780 mW (100 ohms), 260 mW (300 ohms) and 130 mW (600 ohms). For the balanced headphone output, THD+N is 0.00025% at 1 kHz (A-weighted, unloaded), SNR is 132 dB (20 Hz - 20 kHz, A-weighted), channel isolation is 131 dB and minimum noise level is 1.2 µV. Line output level is +24 dBu on XLR and +18 dBu on RCA. Dimensions are 183 x 175 x 63 mm excluding protrusions, and weight is about 1.8 kg.

Engineering and use context

Inside, the power, digital and analogue domains are physically separated, with dedicated analogue power supplies and discrete analogue circuit modules. Gain control has four steps, and maximum balanced headphone level is +27.0 dBu in high gain and +4.0 dBu in low gain. Digital inputs are USB Type-C, XLR AES/EBU, coaxial S/PDIF and optical S/PDIF, and the same three S/PDIF formats are also available as digital outputs. On the front panel are 3.5 mm and 6.35 mm unbalanced jacks, 4.4 mm and 4-pin XLR balanced sockets and a 51 mm TFT LCD.

The DSP runs LCC (Load Capacitance Compensation) for headphone load matching, the ATE transient filter algorithm and PMEQ II, a second-generation parametric EQ. LTTP, the Lotoo tele-transport protocol, carries 48 kHz/24-bit lossless or 96 kHz/24-bit Hi-Res streams with built-in data verification. Power comes in over USB Type-C PD 3.0 at 20 V/3 A. An optional LPX-01 160 W USB PD Power Base has a noise floor of 200 µV (20 Hz - 40 kHz) in a fully shielded metal chassis. Firmware updates are supported, and a C-C data cable and user manual are included.

Pairing

A USB PD 3.0 supply rated 20 V/3 A is required. The XLR and RCA line outputs connect to a power amplifier or active loudspeakers. Balanced listening requires headphones with a 4.4 mm or 4-pin XLR cable.

Alternatives

The Lotoo PAW S2 is the brand's compact USB DAC and headphone amplifier.

Specifications

  • Model name

    Gungnir

  • Conversion type

    N/A

  • Engine

    2xAK419qEQ + 2xAK449EX

  • DSD compatability

    Yes

  • Parameters

    up to 32 bit / 768 kHz and DSD512

  • Frequency response low +/- 3dB (Hz)

    20

  • Frequency response high +/- 3dB (Hz)

    40 000

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    183 x 175 x 63

  • Weight (kg)

    1.8

  • Official link

Related content