The Audiant DP32 is a fully balanced analogue preamplifier with an on-board 32-bit/192 kHz DAC and asynchronous USB, from Perreaux of Dunedin, New Zealand. Perreaux announced it on 18 June 2012 at US$2,895 with a five-year warranty, as part of the Audiant range with the 100p stereo power amplifier and the 80i integrated amplifier. With its outputs set to fixed level, it also works as a standalone DAC.
Key specs that matter
The DAC is the ESS Sabre32 ES9018 Reference 32-bit chip. Digital inputs are one AES/EBU on XLR (110 ohms), one asynchronous USB, two coaxial on RCA (75 ohms) and two optical Toslink, all up to 192 kHz, with 32-bit word length on AES/EBU, coaxial and optical and 24-bit on USB. Analogue inputs are one balanced/unbalanced switchable input (20 kOhm XLR, 47 kOhm RCA) and one unbalanced line input switchable to home theatre bypass. Outputs are one XLR and one RCA preamplifier pair, switchable between variable and fixed level, plus one RCA line output, with output impedances of 100 ohms balanced and 50 ohms unbalanced and a maximum output of 12.0 V RMS. THD+N is 0.0005% at 1 kHz (typical) and below 0.001% from 20 Hz to 20 kHz. Frequency response is 20 Hz - 20 kHz (±0.05 dB). Signal-to-noise ratio is 150 dB unweighted and dynamic range 140 dB, both at 3.8 V RMS, and channel separation on the fixed output is 115 dB at 1 kHz (typical). It measures 431 x 305 x 67 mm (W x D x H) and weighs 8.0 kg.
Engineering and use context
On the USB input the data is reclocked as it passes to the I2S bus. Separate clock oscillators run at 22.5792 MHz for the 44.1 kHz family and 24.5760 MHz for the 48 kHz family. Perreaux pairs this with the HyperStream architecture and Jitter Eliminator of the ESS chipset. AES/EBU and coaxial inputs are transformer-isolated. Inside, discrete shunt regulators supply the circuits, the inputs are direct coupled, and volume is set by a buffered passive control with a range of -110 dB to 0 dB. Balanced and unbalanced outputs have fully separate output buffer stages and can be used at the same time. In home theatre bypass mode the second analogue input is not volume-controlled. Controls and connections include a touch panel, a dimmable display, a remote control, two 3.5 mm trigger outputs (5 V) and an RS232 port.
Pairing
The matching power amplifier is the Perreaux Audiant 100p. Simultaneous use of the XLR and RCA outputs allows bi-amping or an active subwoofer. The output switch has to be set to variable when a power amplifier is connected directly.
Alternatives
Perreaux has no other standalone DAC in its range.