The DENPO is a compact NOS digital-to-analogue converter from Core Audio Ltd., the Hungarian maker of digital source components led by CEO Viktor Varadi. It is the smallest and the most affordable DA converter in the Core Audio range, and the company sets it against DACs in the EUR 15,000 range. The price is EUR 8,000, with a black or silver anodised aluminium finish.
Key specs that matter
Conversion uses one ROHM BD34301 (MUS-IC) chip in a non-oversampling configuration, and no FPGA is used on the digital board. Core Audio lists 3 Hz - 70 kHz (±3 dB), a signal-to-noise ratio of 130 dB, 130 dB dynamic range and THD+N of -115 dB. The USB-B (3.0) and I2S (HDMI) inputs accept PCM from 16/44.1 to 24/384 kHz and native DSD64, DSD128 and DSD256. Coaxial S/PDIF on RCA and BNC, Toslink and AES/EBU accept PCM up to 24/192 kHz. MQA is not supported. Outputs are one pair of RCA (2 Vrms) and one pair of XLR (4 Vrms). Mains supply is 230 V AC, 50 Hz in the EU version, with other voltages on request. Power consumption is 25 W, and the unit measures 480 x 368 x 88 mm and weighs 13 kg net.
Engineering and use context
On the USB side an XMOS interface is followed by a USB reclocking unit that runs from the built-in master clock. That clock section combines 24.576 and 22.5792 MHz TCXOs with a 10 MHz OCXO and a PLL, and Core Audio quotes phase noise of -120 dB at 10 Hz for the OCXO. A 10 MHz BNC clock input (75 ohms) accepts an external master clock.
Its analogue output stage is discrete, with six custom op-amps, three per channel, in replaceable DIP8 sockets. Inside are seven separate linear power supply circuits for the digital, analogue and clock sections of the DAC board, powered by two insulated transformers of Core Audio's own design, separate for the digital and analogue sections. A triple ground scheme is used, and internal wiring is UPOCC. Everything is housed in a machined aluminium case with passive cooling and RF shielding.
Pairing
A preamplifier or integrated amplifier with balanced or single-ended line inputs is required. The matching music server is the DAIDO, the KARUNA DDC is the matching reclocker, and the KAGEN master clock connects through the 10 MHz input. A computer or other USB-only source connects natively.
Alternatives
Core Audio has no other DAC in its current range.