Hifiverse

DACs - Copland DAC215

Description, images, technical data and specifications

Copland DAC215
Image source - (c) Copland

The DAC215 is a DAC, preamplifier and headphone amplifier from Copland of Denmark, a maker of stereo amplification since 1984. Copland calls it a universal high resolution DAC, and it combines a quad-mono ESS converter with a complete analogue preamplifier and tube gain stages for the headphone output. Its UK price was about GBP 1,998.

Key specs that matter

Conversion uses the ES9018 Reference 32-bit DAC in quad-mono configuration, eight mono converters to two stereo channels. The asynchronous USB 2.0 input accepts PCM 44.1 - 384 kHz at 24/32-bit plus native DSD64 and DSD128 (2.8 - 5.6 MHz). S/PDIF inputs are one coaxial and two optical, for PCM 44.1 - 192 kHz at 32-bit. There is one analogue input, and the RCA outputs are fixed and variable. At the DAC output Copland specifies 2.0 V rms at 0 dBFS, 20 Hz - 20 kHz (±0.2 dB), SNR above 120 dB and THD below 0.004%. Two ECC88 / 6DJ8 / 6922 tubes are used in the headphone amplifier, which has 10 dB gain, up to 8.5 V rms, 5.0 ohm output impedance, 20 Hz - 100 kHz (±0.5 dB), SNR 90 dB and THD below 0.02%. Line output impedance is 100 ohms. Power consumption is 25 W, weight is 3.8 kg and dimensions are 200 x 280 x 115 mm (W x D x H).

Engineering and use context

Each channel combines four in-phase and four opposite-phase converters. According to Copland, the signal power of the two phases correlates and adds up, while their noise power is de-correlated, and the signal-to-noise ratio of the analogue waveform improves. Class A buffers made of discrete transistors are used in the analogue filtering sections, a technology carried over from Copland's CD players.

USB data is converted to I2S and connected directly to the DAC chip. No power is taken from the computer. A regulated power supply on its own winding of the power transformer serves the USB input section, and digital isolators interrupt the computer line. Windows Vista, 7, 8 and 10 need a dedicated driver, while Mac OS X and Linux run with UAC2 without drivers.

Level is set by an analogue volume control, and both the volume control and the preamplifier can be bypassed for pure DAC mode. Mains voltage is 110 - 120 V or 220 - 240 V (50/60 Hz), set at the factory.

Pairing

Headphones connect to the front panel output. A power amplifier connects to the variable RCA output, and an amplifier with its own volume control to the fixed output. A computer connects over USB, and a disc transport to the coaxial or optical inputs.

Alternatives

Copland has no other DAC, and the DAC215 is the only digital product in its current range of integrated amplifiers.

Specifications

  • Model name

    DAC215

  • Conversion type

    N/A

  • Engine

    N/A

  • DSD compatability

    Yes

  • Parameters

    USB: up to 32 bit / 384 kHz and DSD128; S/PDIF: up to 192 kHz

  • Frequency response low +/- 3dB (Hz)

    N/A

  • Frequency response high +/- 3dB (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    N/A

  • Output Level (single-ended) (V)

    N/A

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Analog outputs

    N/A

  • Signal to Noise Ratio (dB)

    N/A

  • Total Harmonic Distortion + Noise (% at 22 kHz)

    N/A

  • Dimensions (mm)

    N/A

  • Weight (kg)

    N/A

  • Official link