The DAC9 is a tube digital-to-analogue converter from Audio Research of Minnesota, launched in 2020, the company's 50th anniversary year, at a US list price of USD 8,500. It was the first component of the Foundation Series. Audio Research combines a vacuum-tube analogue section with a digital design that decodes DSD as well as PCM files up to 384 kHz.
Key specs that matter
Five digital inputs are provided. USB 2.0 High Speed accepts 44.1 - 384 kHz, DSD and 2x DSD, the RCA, BNC and XLR inputs accept 44.1 - 192 kHz, and the Toslink optical input 44.1 - 96 kHz. DAC resolution is 24 bits. Frequency response is ±0.15 dB from 20 Hz to 20 kHz and ±3 dB from 6 Hz to 192 kHz. THD+N is less than 0.002% (2 V RMS, 1 kHz, balanced output), signal-to-noise ratio is above 114 dB, channel separation is 107 dB and intrinsic jitter is below 10 ps. Rated output is 3.8 V RMS maximum balanced and 1.9 V maximum single-ended, with output impedance of 500 ohms balanced and 250 ohms single-ended. The chassis measures 480 x 178 x 394 mm (W x H x D), the handles extend 38 mm forward, and net weight is 14.6 kg.
Engineering and use context
Two separate data paths lead to the D/A converters, one for PCM and one for serial DSD at 1x and 2x clock rates, so that decoding is integer and free of interpolation errors. Each channel uses two stereo DACs running in mono, a quad arrangement that Audio Research applies to increase dynamic range and lower the noise floor. The USB input is asynchronous, and all four S/PDIF inputs are galvanically isolated. Fast or slow digital filters can be selected, every input can be upsampled to 352.8 or 384 kHz, and an invert button switches absolute phase.
Its analogue section is a balanced, class A, zero-feedback design with no capacitive coupling, using a pair of 6H30 dual triodes. Expected tube life is about 4,000 hours, and an hours counter shows the time in use. Low and high voltage supplies are electronically regulated, with line regulation better than 0.01%. On the front panel are Power, Menu, Option, Enter, Input and Mute buttons and a vacuum fluorescent display with six brightness levels. An RS-232 port and a 3.5 mm IR input accept control and automation systems.
Pairing
A digital source, such as a computer, streamer or CD transport, is required. Balanced XLR and single-ended RCA main outputs connect to a preamplifier or an integrated amplifier.
Alternatives
The Audio Research DAC8 is the earlier tube-output DAC of the brand.