The DA-07X is a 2-channel USB D/A converter from Luxman of Japan. Luxman derived it from the D-07X SACD/CD player by removing the disc playback functions and reworking functionality and connectivity for use as a standalone DAC. It accepts the digital outputs of network transports, computers, smartphones, TVs, game consoles and CD players. The US list price is USD 8,995.
Key specs that matter
The D/A converter is ROHM BD34301EKV (monaural mode) x 2. Over USB the DA-07X accepts PCM at 44.1 kHz - 768 kHz (16, 24 and 32-bit) and DSD at 2.8, 5.6, 11.2 and 22.5 MHz (1-bit). Coaxial, optical and AES/EBU inputs accept 44.1 kHz - 192 kHz at 16, 20 or 24-bit. Digital inputs are USB, coaxial x 2, optical x 2 and AES/EBU (XLR), and analogue outputs are RCA and XLR. Output voltage is 2.4 V at 300 ohms unbalanced and 2.4 V at 600 ohms balanced, and 2.3 V in DSD format. Frequency response is 5 Hz - 20 kHz (+0, -0.4 dB) and 5 Hz - 47 kHz (+0, -3.0 dB). Total harmonic distortion is 0.001% on both outputs, and S/N ratio (IHF-A) is 124 dB. External dimensions are 440 x 92 x 402 mm (W x H x D), and net weight is 12.8 kg.
Engineering and use context
Both BD34301EKV chips come from ROHM's MUS-IC series and run in a dual mono configuration. The reference clocking system uses two ultra-low phase noise clock modules. For the USB input, a dedicated DSP is used for asynchronous communication, while S/PDIF signals are clocked by a built-in DAIR clock. Every input supports full MQA decoding. PCM has two digital filter modes and DSD two analogue filter modes, and a bypass function is also provided.
In the analogue output stage the current/voltage conversion receives the differential output of each DAC chip, followed by buffer circuitry in a fully balanced output architecture. Power comes from three separate OI core transformers, each with its own regulation and filter capacitors for an individual block. The bottom chassis is made of two steel plates, 2 mm and 1.6 mm thick, and the cast iron insulator feet have a density gradient. A high-definition OLED display shows input, sampling frequency, bit depth, filter and MQA status and has a four-stage dimmer with automatic shut-off. Further functions are digital output off, a DD converter mode and output phase switching on the front panel. LUXMAN Audio Player software for Windows and Mac supports four Bulk Pet transfer modes.
Pairing
An integrated amplifier or control amplifier with RCA or XLR line inputs is required. The XLR outputs allow a balanced connection. Luxman pairs it with the NT-07 network transport.
Alternatives
The Luxman DA-250 is a smaller USB D/A converter with a headphone amplifier, accepting PCM up to 192 kHz/32-bit over USB.