All
DACs — CH Precision C10
Description, images, technical data and specifications
CH Precision C10
Image source — © CH Precision
The C10 is a distinctive digital-to-analogue converter from CH Precision, built around an elaborate 16-chip PCM1704 R2R conversion architecture and an extraordinarily wide bandwidth. The C10 brings CH Precision's most accomplished current engineering to standalone digital conversion.
Key specs that matter
The conversion architecture uses 16 individual PCM1704 R2R chips in parallel - an elaborate multi-chip R2R design some enthusiasts specifically favour for its distinctive tonal character. DSD compatibility is offered at 24-bit/2.8824MHz or 3.072MHz. Frequency response spans an extraordinary 0Hz to 150,000Hz within plus-or-minus 3dB. Signal-to-noise ratio reaches 121dB, with total harmonic distortion plus noise at 0.003% at 22kHz. At 440 x 440 x 133mm, weight totals 20kg plus 23kg reflecting a substantial two-chassis design likely separating the digital and analogue or power-supply sections.
Sound and use context
Expect the distinctive tonal character multi-chip R2R conversion architecture is specifically prized for by devotees, combined with the extraordinarily wide 0Hz-150kHz bandwidth representing CH Precision's absolute flagship-tier current digital source engineering ambition.
Pairing
CH Precision's own P1 phono stage and M10 Stereo power amplifier share the brand's coherent modular engineering philosophy.
Alternatives
CH Precision's own C1.2 Mono offers a more conventional chip-based alternative within the same broader digital source catalogue.
Key specs that matter
The conversion architecture uses 16 individual PCM1704 R2R chips in parallel - an elaborate multi-chip R2R design some enthusiasts specifically favour for its distinctive tonal character. DSD compatibility is offered at 24-bit/2.8824MHz or 3.072MHz. Frequency response spans an extraordinary 0Hz to 150,000Hz within plus-or-minus 3dB. Signal-to-noise ratio reaches 121dB, with total harmonic distortion plus noise at 0.003% at 22kHz. At 440 x 440 x 133mm, weight totals 20kg plus 23kg reflecting a substantial two-chassis design likely separating the digital and analogue or power-supply sections.
Sound and use context
Expect the distinctive tonal character multi-chip R2R conversion architecture is specifically prized for by devotees, combined with the extraordinarily wide 0Hz-150kHz bandwidth representing CH Precision's absolute flagship-tier current digital source engineering ambition.
Pairing
CH Precision's own P1 phono stage and M10 Stereo power amplifier share the brand's coherent modular engineering philosophy.
Alternatives
CH Precision's own C1.2 Mono offers a more conventional chip-based alternative within the same broader digital source catalogue.
Specifications
Model name
C10
Conversion type
R2R
Engine
16 x PCM 1704
DSD compatability
Yes
Parameters
24 bit / 2.8824MHz or 3.072MHz
Frequency response low +/- 3dB (Hz)
0
Frequency response high +/- 3dB (Hz)
150000
Gain (dBu)
N/A
Output Level (balanced) (V)
N/A
Output Level (single-ended) (V)
N/A
Input Impedance (balanced) (Ω)
N/A
Input Impedance (single-ended) (Ω)
N/A
Output Impedance (balanced) (Ω)
N/A
Output Impedance (single-ended) (Ω)
N/A
Analog outputs
N/A
Signal to Noise Ratio (dB)
121
Total Harmonic Distortion + Noise (% at 22 kHz)
0.003
Dimensions (mm)
440 x 440 x 133
Weight (kg)
20 + 23
Official link
