The Alpha PRO is a desktop DAC and headphone amplifier from D&A, or Digi & Aesth, the brand of Shuzhimei Technology in the Nanshan district of Shenzhen, China. Besides conversion it works as an analogue preamplifier. The brand was founded in 2024. Positioned above the Alpha, the Alpha PRO costs USD 699 or EUR 690 and carries a two-year warranty.
Key specs that matter
Conversion uses the ESS ES9039MSPRO DAC chip with MQA hardware decoding. USB 2.0 is asynchronous, on an XMOS XU-316 receiver, and accepts PCM up to 768 kHz/32-bit and native DSD512. Coaxial and optical inputs accept up to 192 kHz/24-bit and DoP64, and MQA-CD is decoded from both. Bluetooth 5.1 on a Qualcomm QCC5125 supports SBC, AAC, aptX, aptX HD and LDAC at 96 kHz/24-bit. Line output is 5.2 Vrms on XLR and 2.5 Vrms on RCA, both at 100 ohms. THD+N (unweighted) is 0.00006% on XLR, 0.00007% on RCA and 0.0001% on headphones, with dynamic range and SNR of 133, 128 and 125 dB. Headphone power is 2 x 6000 mW into 32 ohms, 2 x 1400 mW into 150 ohms and 2 x 350 mW into 600 ohms. Size is 225 x 55 x 199.3 mm (W x H x D) and weight 1.76 kg.
Engineering and use context
D&A calls its DAC topology SIGMA DAC. It uses 8-channel differential signal summation per channel, and D&A quotes four times lower output impedance and 75% lower noise. Clocking comes from a second PLL and three femtosecond oscillators.
Its 4C-FBDA headphone amplifier is a fully balanced discrete class AB circuit with 32 transistors across four channels and an output impedance below 0.1 ohm. Balanced headphone sockets are 4-pin XLR and 4.4 mm, and the single-ended one is a 6.35 mm jack. High gain is +15.8 dB balanced and +9.8 dB unbalanced, with high, medium and low gain settings.
On the analogue side, the RCA line input passes through an NJU72315 analogue volume control. A front-panel button selects one of three output modes - DAC with bit-perfect decoding, preamplifier, and headphone amplifier. Power comes from discrete linear regulated supplies, with separate regulation for the amplification and decoding modules. Digital and analogue sections are separated by 4-layer PCB isolation with independent ground planes. Consumption is below 50 W, and below 0.5 W in standby.
Pairing
The XLR and RCA line outputs connect to power amplifiers or active loudspeakers. A turntable connects to the line input through a phono preamplifier. Windows 7 to 11 requires a USB driver.
Alternatives
The D&A Alpha is the brand's other desktop DAC and headphone amplifier, positioned below the Alpha PRO.