The TCD-70T is a CD player with a vacuum tube output stage from TAGA Harmony, the Polish brand of Polpak Poland near Warsaw. It plays CD-Audio only, from CD, CD-R and CD-RW media, and does not read SACD. Launched at the start of 2025, it was priced at GBP 599 in the UK and around USD 700 in the US. Finishes are black and silver, with an aluminium faceplate, a metal chassis and a window that shows the tubes.
Key specs that matter
Digital to analogue conversion uses the ESS SABRE ES9018 Reference 32-bit DAC. Frequency response is 20 Hz - 20 kHz (±1 dB). THD is below 0.005% (A-weighted, 1 kHz, 0 dBFS), signal-to-noise ratio is above 110 dB (A-weighted) and crosstalk is below -100 dB at 1 kHz. Analogue outputs are unbalanced RCA and balanced XLR. Optical and coaxial digital outputs carry up to 44.1 kHz/16-bit. A 3.5 mm headphone output has variable level, 0-30 mW into 32 ohms and 0-50 mW into 600 ohms. Power consumption is 100 W maximum and under 0.5 W in standby, from 220-240 V at 50 Hz. Dimensions are 80 x 430 x 320 mm (H x W x D) including feet, and weight is 5.8 kg.
Engineering and use context
Two 6N2 tubes in ceramic sockets form the output stage for the RCA output. TAGA lists the 6AX7, 6H2N, 6N2J, 6N2P, 6N2P-EB, 6N2P-EV, 6N2pi and 6SS41 as usable replacements. Replacement tubes are not supplied, and their warranty is six months from purchase. According to TAGA, the ES9018 uses Hyperstream architecture and a Time Domain Jitter Eliminator. After it comes a 2-pole fully differential linear phase Bessel filter.
Disc reading is controlled by a Sunplus SPHE8104G servo IC with intelligent correction, backed by buffer memory. Power comes from a 100 W toroidal transformer. All RCA and XLR sockets are wired with oxygen-free copper, and the RCA outputs use gold-plated machined brass sockets. An IEC C14 inlet accepts the supplied, removable Schuko-IEC C13 cord.
With headphones connected, all rear outputs stay active. After about 20 minutes without playback the player switches to standby. Display brightness is adjustable, and the tube window backlight can be switched off. Up to 24 tracks can be programmed, and repeat all, repeat track, A-B repeat and random play are available from the supplied remote control, which covers every function of the player.
Pairing
A preamplifier or integrated amplifier with an RCA or XLR line input is required. The coaxial and optical outputs connect to an external DAC.
Alternatives
The TAGA Harmony TCD-50 is another CD player in the TAGA Harmony range.