The MCT500 is a two-channel SACD/CD transport from McIntosh Laboratory of Binghamton, New York. It is a digital-only unit with no D/A converter inside and four digital outputs. McIntosh announced it in February 2018 at USD 4,500 and GBP 5,995. Today the company lists it as retired with limited availability, covered by a 3-year limited warranty.
Key specs that matter
Outputs are balanced XLR, coaxial, optical and the proprietary MCT connector. XLR, coaxial and optical carry up to 24-bit/192 kHz, while MCT carries CD at up to 24-bit/96 kHz and DSD128 from SACD and data DVD. Output levels are 5 V p-p/150 ohms (XLR), 0.5 V p-p/75 ohms (coaxial), -15 to -21 dBm (optical) and 3 V at 110 ohms (MCT), with digital output jitter of 32 ns or less (1 kHz test tone). Supported discs are SACD, CD, CD-R/RW and DVD-R. From data CDs, data DVDs and USB flash drives it plays AAC, AIFF, ALAC, DSD up to DSD128, FLAC, MP3, WAV up to 24-bit/192 kHz and WMA. Dimensions are 444.5 x 152.4 x 483 mm (W x H x D), and weight is 11.8 kg.
Engineering and use context
A twin-beam laser optical pickup operates at 650 nm for SACD and 790 nm for CD. The disc transport uses a precision die-cast aluminium tray and an advanced digital servo. According to McIntosh, audio data is read at twice the normal rate for better disc tracking and error correction processing.
SACD playback is possible only over the MCT output, connected with the included cable to a McIntosh product with an MCT input. McIntosh names the D1100, C55, C2800, C49 and D150 preamplifiers, the MA9500, MA8950, MA7200 and MA5300 integrated amplifiers and the MAC7200 receiver. Regular CDs also play over that link. For CDs alone, any component with standard digital inputs and a DAC can be connected.
On the front panel sits a Type A USB input. Its rear panel carries one power control input, one power control output, one data input and one IR sensor input, with no RS232 port. With the tray open, 172 mm of clearance is required in front of the mounting panel. McIntosh styling includes a polished stainless steel chassis, black glass front panel, illuminated logo and aluminium end caps.
Pairing
A DAC with an AES/EBU, coaxial or Toslink input is required for CD and file playback. SACD requires a McIntosh component with an MCT input. The matching stand-alone converter is the McIntosh MDA200.
Alternatives
The McIntosh MCT80 is a two-channel SACD/CD transport with coaxial, optical and MCT outputs.