Hifiverse

CD / SACD players and transports - Audia Flight FLS 20

Description, images, technical data and specifications

Audia Flight FLS 20
Image source - (c) Audia Flight

Loaded from the top, the FLS 20 plays SACD as well as CD and belongs to the FLS series of Audia Flight, the Italian maker of electronics. Both disc formats pass through a dual mono converter layout, and the player also accepts external digital sources, which makes it a combined disc player and DAC. The base unit is priced at EUR 17,900 and is offered in two finishes, silver or black.

Key specs that matter

Frequency response is 2 Hz to 50 kHz within 0.5 dB for SACD and 2 Hz to 20 kHz within 0.5 dB for CD. Dynamic range is stated as 140 dB, and THD plus noise is below minus 122 dB. Analogue signals leave the player on XLR and RCA sockets. Four digital inputs are built in - Toslink, AES/EBU, S/PDIF and USB - and four digital outputs cover Toslink, AES/EBU, S/PDIF and I2S. The case is 450 mm wide, 134 mm high and 364 mm deep and weighs 17 kg, and power consumption is 150 W.

Engineering and use context

Conversion relies on two 32-bit Sabre ES9038PRO chips from ESS Technology, one per channel, each run in differential mode. Each channel's converter is clocked by an ultra-low-noise Crystek CCHD-950 clock generator, which keeps the two dual mono converter chips synchronised. The power supply is split across three toroidal transformers - 80 VA for the analogue section, 85 VA for the digital subsystem and 15 VA for the logic control unit. Ten low-noise voltage stabilisers feed the sensitive circuits, and four more are assigned to the balanced output stages. Those output stages are fully balanced Class A designs using discrete current feedback. The disc slot on the top plate uses a vibration isolation design, and the front panel is made of thick aluminium. An optional streamer card priced at EUR 2,200 adds network playback to the digital inputs already fitted.

Pairing

The fully balanced output stage connects naturally to amplifiers with XLR inputs, such as the FLS series integrated models from the same maker, which offer two balanced inputs. The I2S output gives a route to an outboard converter that accepts that interface, and the coaxial and AES/EBU digital outputs let the drive serve as a transport. Computers connect through the USB input, while a streamer or television can use the optical or coaxial inputs.

Alternatives

The Audia Flight FL CD Three S plays CD only in the smaller FL Three S casework, using two AKM AK4493EQ converters, six selectable digital filters and a 10 kg chassis with a 30 W operating draw.

Specifications

  • Model name

    FLS 20

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    Yes

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    20

  • Frequency response high +/- 3dB (for CD) (Hz)

    20 000

  • Frequency response low +/- 3dB (for SACD) (Hz)

    20

  • Frequency response high +/- 3dB (for SACD) (Hz)

    50 000

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    2.5

  • Output Level (single-ended) (V)

    2.5

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    240

  • Output Impedance (single-ended) (Ω)

    240

  • Dynamic range (for CD) (dB)

    N/A

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    110

  • Signal to Noise Ratio (for SACD) (dB)

    110

  • Total Harmonic Distortion + Noise (for CD) (%)

    0.02

  • Total Harmonic Distortion + Noise (for SACD) (%)

    0.02

  • Dimensions (mm)

    450x134x364

  • Weight (kg)

    17

  • Official link

More components