Hifiverse

CD / SACD players and transports - Electrocompaniet EMC 1 MKV Reference

Description, images, technical data and specifications

Electrocompaniet EMC 1 MKV Reference
Image source - (c) Electrocompaniet

The EMC 1 MKV Reference is a top-loading CD player from Electrocompaniet, made in Norway at Tau. It succeeds the EMC 1 UP, which Electrocompaniet built from 1998, and uses a new drive unit, updated electronics, new mechanics and a new chassis styled to match the MKII editions of the brand's other products. The player is dedicated to CD, CD-R and CD-RW.

Key specs that matter

Output level is 2.3 V RMS unbalanced and 4.6 V RMS balanced. Noise floor is below -130 dB, and frequency deviation is 0.05 dB from 20 Hz to 20 kHz. Channel separation is above 110 dB, THD+N is below 0.003%, and dynamic range is 120 dB. Digital-to-analogue conversion runs at 24 bit/192 kHz. Power consumption is 25 W in operation and 0.5 W in standby. Dimensions are 470 x 422 x 118 mm (W x D x H), and weight is 18 kg.

Engineering and use context

Electrocompaniet describes the player as a true balanced system with a fully balanced D/A converter and discrete analogue audio circuitry. Its top-loading transport sits on a Mechanical Cancellation System, a mechanical filter that cancels acoustic and mechanical vibration before it reaches the laser pick-up. This cancellation system weighs close to 6 kg on its own and is locked with transport screws for shipping. A sliding cover gives access to the spindle, and a supplied CD clamp holds the disc.

Five separate housings shield the analogue, digital, transport, transformer and controller circuitry. The feet are SoundCare SuperSpikes, all-in-one spike feet that isolate the player from external vibration.

Rear-panel connections are a balanced XLR output per channel, an RCA analogue output pair, coaxial S/PDIF and Toslink digital outputs, an RS-232 port for home installation and a 3.5 mm 12 V trigger input. A voltage selector switches between 115 and 230 V mains. The player has no volume control and is fully remote-controlled, with an IR remote in the box.

Pairing

A preamplifier or integrated amplifier with balanced XLR inputs is the preferred partner. External DACs connect to the coaxial S/PDIF or Toslink output. Its 12 V trigger input accepts the trigger signal of an amplifier or preamplifier.

Alternatives

The EMC 1 MKV SE Reference is a special version of this player, produced in 200 units for China.

Specifications

  • Model name

    EMC 1 MKV Reference

  • Transport

    Yes

  • Player

    Yes

  • SACD support

    N/A

  • Engine

    N/A

  • Frequency response low +/- 3dB (for CD) (Hz)

    20

  • Frequency response high +/- 3dB (for CD) (Hz)

    20 000

  • Frequency response low +/- 3dB (for SACD) (Hz)

    N/A

  • Frequency response high +/- 3dB (for SACD) (Hz)

    N/A

  • Gain (dBu)

    N/A

  • Output Level (balanced) (V)

    4,6

  • Output Level (single-ended) (V)

    2,3

  • Input Impedance (balanced) (Ω)

    N/A

  • Input Impedance (single-ended) (Ω)

    N/A

  • Output Impedance (balanced) (Ω)

    N/A

  • Output Impedance (single-ended) (Ω)

    N/A

  • Dynamic range (for CD) (dB)

    120

  • Dynamic range (for SACD) (dB)

    N/A

  • Signal to Noise Ratio (for CD) (dB)

    N/A

  • Signal to Noise Ratio (for SACD) (dB)

    N/A

  • Total Harmonic Distortion + Noise (for CD) (%)

    <0.003

  • Total Harmonic Distortion + Noise (for SACD) (%)

    N/A

  • Dimensions (mm)

    470 × 422 × 118

  • Weight (kg)

    18

  • Official link